Move PHYLIB to Kconfig

[platform/kernel/u-boot.git] / include / configs / dra7xx_evm.h

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index a9ca023..486653b 100644 (file)
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -24,10 +24,9 @@
 
 #ifndef CONFIG_QSPI_BOOT
 /* MMC ENV related defines */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         1       /* SLOT2: eMMC(1) */
 #define CONFIG_ENV_SIZE                        (128 << 10)
-#define CONFIG_ENV_OFFSET              0xE0000
+#define CONFIG_ENV_OFFSET              0x260000
 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #endif
@@ -41,6 +40,10 @@
 #define CONFIG_SYS_NS16550_COM2                UART2_BASE      /* UART2 */
 #define CONFIG_SYS_NS16550_COM3                UART3_BASE      /* UART3 */
 
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Main EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
 #ifndef CONFIG_SPL_BUILD
@@ -53,7 +56,7 @@
        "partitions_android=" \
        "uuid_disk=${uuid_gpt_disk};" \
        "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
-       "name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \
+       "name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
        "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
        "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
        "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
@@ -110,7 +113,6 @@
 #define CONFIG_DRIVER_TI_CPSW          /* Driver for IP block */
 #define CONFIG_MII                     /* Required in net/eth.c */
 #define CONFIG_PHY_GIGE                        /* per-board part of CPSW */
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_TI
 
 /* SPI */
@@ -134,7 +136,6 @@
 #define CONFIG_SYS_SPI_ARGS_OFFS       0x140000
 #define CONFIG_SYS_SPI_ARGS_SIZE       0x80000
 #if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SIZE                        (64 << 10)
@@ -152,13 +153,11 @@
 
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_OMAP_USB2PHY2_HOST
 
 /* SATA */
-#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
@@ -234,7 +233,6 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 /* Reduce SPL size by removing unlikey targets */
 #ifdef CONFIG_NOR_BOOT
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE           (128 * 1024)    /* 128 KiB */
 #define MTDIDS_DEFAULT                 "nor0=physmap-flash.0"
 #define MTDPARTS_DEFAULT               "mtdparts=physmap-flash.0:" \