+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011
- * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
+ * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
*
* Based on Kirkwood support:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_DNS325_H
#define _CONFIG_DNS325_H
-/*
- * Machine number definition
- */
-#define MACH_TYPE_DNS325 3800
-#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
-#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
-#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DATE
-#define CONFIG_SYS_MVFS
-
-#define CONFIG_NR_DRAM_BANKS 1
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
#include "mv-common.h"
/* Remove or override few declarations from mv-common.h */
-#undef CONFIG_SYS_PROMPT
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_NETCONSOLE
-#endif
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif
-
-/*
- * RTC driver configuration
- */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
#endif
/*
* Enable GPI0 support
*/
-#define CONFIG_KIRKWOOD_GPIO
-
-/*
- * Use the HUSH parser
- */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Console configuration
- */
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/*
- * Enable device tree support
- */
-#define CONFIG_OF_LIBFDT
-
-/*
- * Display cpu info at boot
- */
-#define CONFIG_DISPLAY_CPUINFO
/*
* Environment variables configurations
*/
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
-#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
-#define CONFIG_ENV_ADDR 0xe0000
-#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
/*
* Default environment variables
*/
-#define MTDIDS_DEFAULT "nand0=orion_nand"
-
-#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
- "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"loadaddr=0x800000\0" \
- "autoload=no\0" \
"console=ttyS0,115200\0" \
- "mtdparts="MTDPARTS_DEFAULT \
"optargs=\0" \
"bootenv=uEnv.txt\0" \
"importbootenv=echo Importing environment ...; " \
"setenv bootenvrootfstype ${nandrootfstype}; " \
"setenv bootenvloadimage ${nandloadimage}\0"
-#define CONFIG_BOOTCOMMAND \
- "if test -n ${bootenv} && usb start; then " \
- "if run loadbootenv; then " \
- "echo Loaded environment ${bootenv} from usb;" \
- "run importbootenv;" \
- "fi;" \
- "if test -n ${bootenvcmd}; then " \
- "echo Running bootenvcmd ...;" \
- "run bootenvcmd;" \
- "fi;" \
- "fi;" \
- "run setnandbootenv subbootcmd;"
-
#endif /* _CONFIG_DNS325_H */