* (C) Copyright 2010
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME dlvsion-10g
-#define CONFIG_IDENT_STRING " dlvision-10g 0.01"
+#define CONFIG_IDENT_STRING " dlvision-10g 0.05"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
+#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
/*
* Configure PLL
*/
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DTT
#undef CONFIG_CMD_EEPROM
/*
/*
* I2C stuff
*/
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000
/* Temp sensor/hwmon/dtt */
#define CONFIG_DTT_LM63 1 /* National LM63 */
-#define CONFIG_DTT_SENSORS { 0x4c, 0x4e } /* Sensor addresses */
+#define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */
#define CONFIG_DTT_PWM_LOOKUPTABLE \
- { { 40, 10 }, { 50, 20 }, { 60, 40 } }
+ { { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\
+ { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
#define CONFIG_DTT_TACH_LIMIT 0xa10
/* EBC peripherals */
#define CONFIG_SYS_FPGA_COUNT 2
+#define CONFIG_SYS_FPGA_PTR { \
+ (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \
+ (struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE }
+
+#define CONFIG_SYS_FPGA_COMMON
+
#define CONFIG_SYS_LATCH0_RESET 0xffff
#define CONFIG_SYS_LATCH0_BOOT 0xffff
-#define CONFIG_SYS_LATCH1_RESET 0xffcf
+#define CONFIG_SYS_LATCH1_RESET 0xffbf
#define CONFIG_SYS_LATCH1_BOOT 0xffff
+#define CONFIG_SYS_FPGA_NO_RFL_HI
+
/*
* FLASH organization
*/
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */
* OSD Setup
*/
#define CONFIG_SYS_ICS8N3QV01
+#define CONFIG_SYS_MPC92469AC
#define CONFIG_SYS_SIL1178
#define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT