Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

[platform/kernel/u-boot.git] / include / configs / devkit8000.h

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 248a5b2..83a8b5d 100644 (file)
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -36,6 +36,8 @@
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3_DEVKIT8000        1       /* working with DevKit8000 */
 #define CONFIG_MACH_TYPE       MACH_TYPE_DEVKIT8000
+#define CONFIG_OMAP_GPIO
+
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  * 64 bytes before this address should be set aside for u-boot.img's
@@ -57,7 +59,6 @@
 #define V_OSCK                         26000000        /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ                  /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
@@ -197,6 +198,7 @@
                "run commonargs; " \
                "setenv bootargs ${bootargs} " \
                "root=/dev/mmcblk0p2 " \
+               "rootwait " \
                "${kernelopts}\0" \
        "nandargs=" \
                "run commonargs; " \
@@ -231,7 +233,7 @@
                "dhcp ${loadaddr}; " \
                "run netargs; " \
                "bootm ${loadaddr}\0" \
-       "autoboot=if mmc rescan ${mmcdev}; then " \
+       "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
                        "if run loadbootscript; then " \
                                "run bootscript; " \
                        "else " \
@@ -249,7 +251,6 @@
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_AUTO_COMPLETE           1
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "OMAP3 DevKit8000 # "
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
@@ -275,9 +276,6 @@
 #define CONFIG_SYS_PTV                 2 /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/* The stack sizes are set up in start.S using the settings below */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-
 /*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS           2 /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1                   OMAP34XX_SDRC_CS0
@@ -306,6 +304,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -314,8 +313,12 @@
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"