configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / devkit3250.h

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 16031c1..f30958f 100644 (file)
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -12,67 +12,33 @@
 #include <linux/sizes.h>
 #include <asm/arch/cpu.h>
 
-#define CONFIG_MACH_TYPE               MACH_TYPE_DEVKIT3250
-
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
 /*
  * Memory configurations
  */
-#define CONFIG_SYS_MALLOC_LEN          SZ_1M
 #define CONFIG_SYS_SDRAM_BASE          EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE          SZ_64M
-#define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE + SZ_32K)
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - SZ_1M)
-
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + SZ_32K)
 
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + SZ_4K \
                                         - GENERATED_GBL_DATA_SIZE)
 
 /*
- * Serial Driver
- */
-#define CONFIG_SYS_LPC32XX_UART                5   /* UART5 */
-
-/*
  * DMA
  */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_DMA_LPC32XX
-#endif
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_LPC32XX
-#define CONFIG_SYS_I2C_SPEED           100000
 
 /*
  * GPIO
  */
-#define CONFIG_LPC32XX_GPIO
-
-/*
- * SSP/SPI
- */
-#define CONFIG_LPC32XX_SSP_TIMEOUT     100000
 
 /*
  * Ethernet
  */
 #define CONFIG_RMII
-#define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
 /*
  * NOR Flash
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_MAX_FLASH_SECT      71
 #define CONFIG_SYS_FLASH_BASE          EMC_CS0_BASE
 #define CONFIG_SYS_FLASH_SIZE          SZ_4M
@@ -96,9 +62,6 @@
 #define CONFIG_LPC32XX_NAND_SLC_RHOLD          200000000
 #define CONFIG_LPC32XX_NAND_SLC_RSETUP         50000000
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE             0x20000
-#define CONFIG_SYS_NAND_PAGE_SIZE              NAND_LARGE_BLOCK_PAGE_SIZE
-
 /*
  * USB
  */
@@ -118,16 +81,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_SIZE                        SZ_128K
-#define CONFIG_ENV_OFFSET              0x000A0000
-
-#define CONFIG_BOOTCOMMAND                     \
-       "dhcp; "                                \
-       "tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; "         \
-       "tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; "       \
-       "setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; "     \
-       "setenv bootargs ${bootargs} ${nfsargs} ${userargs}; "                  \
-       "bootm ${loadaddr} - ${dtbaddr}"
 
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "autoload=no\0"                         \
@@ -141,14 +94,7 @@
  * U-Boot Commands
  */
 
-/*
- * Boot Linux
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
 #define CONFIG_BOOTFILE                        "uImage"
-#define CONFIG_LOADADDR                        0x80008000
 
 /*
  * SPL specific defines
@@ -164,16 +110,13 @@
 
 /* SPL loads an image from NAND */
 #define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_DRIVERS
 
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SOFTECC
 
 #define CONFIG_SPL_MAX_SIZE            0x20000
 #define CONFIG_SPL_PAD_TO              CONFIG_SPL_MAX_SIZE
 
 /* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x60000
 
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE