Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY

[platform/kernel/u-boot.git] / include / configs / devkit3250.h

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index ae2b81b..caabd97 100644 (file)
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -14,8 +14,6 @@
 
 #define CONFIG_MACH_TYPE               MACH_TYPE_DEVKIT3250
 
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
 #if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
@@ -26,8 +24,6 @@
 #define CONFIG_SYS_MALLOC_LEN          SZ_1M
 #define CONFIG_SYS_SDRAM_BASE          EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE          SZ_64M
-#define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE + SZ_32K)
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - SZ_1M)
 
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + SZ_32K)
 
@@ -35,11 +31,6 @@
                                         - GENERATED_GBL_DATA_SIZE)
 
 /*
- * Serial Driver
- */
-#define CONFIG_SYS_LPC32XX_UART                5   /* UART5 */
-
-/*
  * DMA
  */
 #if !defined(CONFIG_SPL_BUILD)
@@ -49,8 +40,6 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_LPC32XX
 #define CONFIG_SYS_I2C_SPEED           100000
 
 /*
@@ -59,15 +48,9 @@
 #define CONFIG_LPC32XX_GPIO
 
 /*
- * SSP/SPI
- */
-#define CONFIG_LPC32XX_SSP_TIMEOUT     100000
-
-/*
  * Ethernet
  */
 #define CONFIG_RMII
-#define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
@@ -78,7 +61,6 @@
 #define CONFIG_SYS_MAX_FLASH_SECT      71
 #define CONFIG_SYS_FLASH_BASE          EMC_CS0_BASE
 #define CONFIG_SYS_FLASH_SIZE          SZ_4M
-#define CONFIG_SYS_FLASH_CFI
 
 /*
  * NAND controller
@@ -101,7 +83,6 @@
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE             0x20000
 #define CONFIG_SYS_NAND_PAGE_SIZE              NAND_LARGE_BLOCK_PAGE_SIZE
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
 /*
  * USB
@@ -122,8 +103,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_SIZE                        SZ_128K
-#define CONFIG_ENV_OFFSET              0x000A0000
 
 #define CONFIG_BOOTCOMMAND                     \
        "dhcp; "                                \
@@ -158,7 +137,6 @@
  * SPL specific defines
  */
 /* SPL will be executed at offset 0 */
-#define CONFIG_SPL_TEXT_BASE           0x00000000
 
 /* SPL will use SRAM as stack */
 #define CONFIG_SPL_STACK               0x0000FFF8
@@ -169,9 +147,7 @@
 
 /* SPL loads an image from NAND */
 #define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_DRIVERS
 
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SOFTECC
 
 #define CONFIG_SPL_MAX_SIZE            0x20000