pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option

[platform/kernel/u-boot.git] / include / configs / debris.h

diff --git a/include/configs/debris.h b/include/configs/debris.h
index 42b8c34..c40fbd9 100644 (file)
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -81,7 +81,7 @@
 #undef CONFIG_SYS_AUTOLOAD
 
 /* rootpath */
-#define CONFIG_ROOTPATH /tftpboot/target
+#define CONFIG_ROOTPATH "/tftpboot/target"
 
 /* gatewayip */
 #define CONFIG_GATEWAYIP 192.168.0.1
@@ -93,7 +93,7 @@
 #define CONFIG_HOSTNAME debris
 
 /* bootfile */
-#define CONFIG_BOOTFILE pImage
+#define CONFIG_BOOTFILE "pImage"
 
 /* loadaddr */
 #define CONFIG_LOADADDR 800000
@@ -148,7 +148,7 @@
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_KGBD
+#define CONFIG_CMD_KGDB
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
@@ -172,9 +172,9 @@
  *-----------------------------------------------------------------------
  */
 #define CONFIG_PCI                             /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
@@ -199,21 +199,18 @@
 #define CONFIG_SYS_MONITOR_BASE        0x00090000
 #define CONFIG_SYS_RAMBOOT             1
 #define CONFIG_SYS_INIT_RAM_ADDR       (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_END        0x10000
-#define CONFIG_SYS_GBL_DATA_SIZE       256  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x10000
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 #else
 #undef CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_MONITOR_LEN         0x00040000
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 
-/*#define CONFIG_SYS_GBL_DATA_SIZE    256*/
-#define CONFIG_SYS_GBL_DATA_SIZE       128
 
 #define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_END      0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 #endif
 
@@ -298,7 +295,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* and takes up to 10 msec */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_FLASH_BANKS         { FLASH_BASE0_PRELIM }
 
 /*-----------------------------------------------------------------------
@@ -453,16 +449,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ      1