+/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
+ * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
*/
#ifndef _CONFIG_DB_MV7846MP_GP_H
/*
* High Level Configuration Options (easy to change)
*/
-#define CONFIG_ARMADA_XP /* SOC Family Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-#define CONFIG_SYS_TEXT_BASE 0x04000000
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
+#define CONFIG_DB_784MP_GP /* Board target name for DDR training */
/*
- * Commands configuration
+ * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
+ * for DDR ECC byte filling in the SPL before loading the main
+ * U-Boot into it.
*/
-#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_TFTPPUT
-#define CONFIG_CMD_TIME
+#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
-#define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE
+#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
#define CONFIG_SYS_I2C_SLAVE 0x0
#define CONFIG_SYS_I2C_SPEED 100000
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED 1000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
-#define CONFIG_SPI_FLASH_STMICRO
+/* USB/EHCI configuration */
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
/* Environment in SPI NOR flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
-#define CONFIG_PHY_MARVELL /* there is a marvell phy */
-#define CONFIG_PHY_BASE_ADDR 0x10
-#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_QSGMII
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-#define CONFIG_RESET_PHY_R
-#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
-#define CONFIG_SYS_ALT_MEMTEST
+/* SATA support */
+#define CONFIG_SYS_SATA_MAX_DEVICE 2
+#define CONFIG_LBA48
+
+/* PCIe support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
+/* NAND */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
/*
* mv-common.h should be defined after CMD configs since it used them
*/
#include "mv-common.h"
+/*
+ * Memory layout while starting into the bin_hdr via the
+ * BootROM:
+ *
+ * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
+ * 0x4000.4030 bin_hdr start address
+ * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
+ * 0x4007.fffc BootROM stack top
+ *
+ * The address space between 0x4007.fffc and 0x400f.fff is not locked in
+ * L2 cache thus cannot be used.
+ */
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
+
+#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
+#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
+
+/* SPL related SPI defines */
+#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
+
+/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
+#define CONFIG_SPD_EEPROM 0x4e
+#define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */
+
#endif /* _CONFIG_DB_MV7846MP_GP_H */