configs: Migrate CMD_NAND*

[platform/kernel/u-boot.git] / include / configs / db-mv784mp-gp.h

diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index e988f02..7174f6b 100644 (file)
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -10,7 +10,6 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_ARMADA_XP               /* SOC Family Name */
 #define CONFIG_DB_784MP_GP             /* Board target name for DDR training */
 
 #define CONFIG_DISPLAY_BOARDINFO_LATE
@@ -26,23 +25,7 @@
 /*
  * Commands configuration
  */
-#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SATA
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_TFTPPUT
-#define CONFIG_CMD_TIME
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -60,7 +43,6 @@
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET              (1 << 20) /* 1MiB in */
 #define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
@@ -68,7 +50,6 @@
 #define CONFIG_PHY_MARVELL             /* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
 #define CONFIG_SYS_ALT_MEMTEST
 
 /* SATA support */
@@ -76,17 +57,13 @@
 #define CONFIG_SATA_MV
 #define CONFIG_LIBATA
 #define CONFIG_LBA48
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
 
 /* Additional FS support/configuration */
 #define CONFIG_SUPPORT_VFAT
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI
 #define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
@@ -129,22 +106,13 @@
 #define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS             0
-#define CONFIG_SPL_SPI_CS              0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
 #define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
 
 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
-#define CONFIG_SYS_MVEBU_DDR_AXP
 #define CONFIG_SPD_EEPROM              0x4e
+#define CONFIG_BOARD_ECC_SUPPORT       /* this board supports ECC */
 
 #endif /* _CONFIG_DB_MV7846MP_GP_H */