configs: move CONFIG_SPL_TEXT_BASE to Kconfig

[platform/kernel/u-boot.git] / include / configs / db-88f6820-gp.h

diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 32f93f2..c98679e 100644 (file)
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_DB_88F6820_GP_H
@@ -11,14 +10,6 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-/*
- * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
- * for DDR ECC byte filling in the SPL before loading the main
- * U-Boot into it.
- */
-#define        CONFIG_SYS_TEXT_BASE    0x00800000
 #define CONFIG_SYS_TCLK                250000000       /* 250MHz */
 
 /*
@@ -32,10 +23,6 @@
 #define CONFIG_SYS_I2C_SLAVE           0x0
 #define CONFIG_SYS_I2C_SPEED           100000
 
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED                1000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
-
 /*
  * SDIO/MMC Card Configuration
  */
@@ -50,11 +37,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                         CONFIG_SYS_SCSI_MAX_LUN)
 
-/* Partition support */
-
-/* Additional FS support/configuration */
-#define CONFIG_SUPPORT_VFAT
-
 /* USB/EHCI configuration */
 #define CONFIG_EHCI_IS_TDI
 
@@ -63,17 +45,13 @@
 #define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE           (256 << 10) /* 256KiB sectors */
 
-#define CONFIG_PHY_MARVELL             /* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "fdt_high=0x10000000\0"         \
@@ -92,9 +70,7 @@
 #define CONFIG_SPL_BOOT_DEVICE         SPL_BOOT_SPI_NOR_FLASH
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_SIZE                        (140 << 10)
-#define CONFIG_SPL_TEXT_BASE           0x40000030
 #define CONFIG_SPL_MAX_SIZE            (CONFIG_SPL_SIZE - 0x0030)
 
 #define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + CONFIG_SPL_SIZE)
@@ -109,7 +85,6 @@
 
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x24000
 #define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
 #endif