Convert CONFIG_PCI_GT64120 to Kconfig

[platform/kernel/u-boot.git] / include / configs / db-88f6820-gp.h

diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index ed851bc..bba2b60 100644 (file)
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -10,81 +10,18 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_SYS_TCLK                250000000       /* 250MHz */
-
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE0                MVEBU_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE           0x0
-#define CONFIG_SYS_I2C_SPEED           100000
-
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
-#define CONFIG_SYS_SCSI_MAX_LUN                1
-#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                        CONFIG_SYS_SCSI_MAX_LUN)
-
-/* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
 
 /* Environment in SPI NOR flash */
 
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "fdt_high=0x10000000\0"         \
        "initrd_high=0x10000000\0"
 
-/* SPL */
-/*
- * Select the boot device here
- *
- * Currently supported are:
- * SPL_BOOT_SPI_NOR_FLASH      - Booting via SPI NOR flash
- * SPL_BOOT_SDIO_MMC_CARD      - Booting via SDIO/MMC card (partition 1)
- */
-#define SPL_BOOT_SPI_NOR_FLASH         1
-#define SPL_BOOT_SDIO_MMC_CARD         2
-#define CONFIG_SPL_BOOT_DEVICE         SPL_BOOT_SPI_NOR_FLASH
-
-/* Defines for SPL */
-#define CONFIG_SPL_SIZE                        (140 << 10)
-#define CONFIG_SPL_MAX_SIZE            (CONFIG_SPL_SIZE - 0x0030)
-
-#define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + CONFIG_SPL_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE                (16 << 10)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
-#define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
-#define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
-/* SPL related SPI defines */
-#define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
-/* SPL related MMC defines */
-#define CONFIG_SYS_MMC_U_BOOT_OFFS             (160 << 10)
-#define CONFIG_SYS_U_BOOT_OFFS                 CONFIG_SYS_MMC_U_BOOT_OFFS
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER      0x00180000      /* in SDRAM */
-#endif
-#endif
-
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros