Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / configs / db-88f6720.h

diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h
index 699c03f..76c02f6 100644 (file)
--- a/include/configs/db-88f6720.h
+++ b/include/configs/db-88f6720.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_DB_88F6720_H
@@ -10,49 +9,24 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define        CONFIG_SYS_TEXT_BASE    0x00800000
-#define CONFIG_SYS_TCLK                200000000       /* 200MHz */
-
-/*
- * Commands configuration
- */
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE0                MVEBU_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE           0x0
-#define CONFIG_SYS_I2C_SPEED           100000
 
 /* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_EHCI_IS_TDI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED                1000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
-
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET              (1 << 20) /* 1MiB in */
-#define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
 
-#define CONFIG_PHY_MARVELL             /* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
-#define CONFIG_SYS_ALT_MEMTEST
-
-/* Additional FS support/configuration */
-#define CONFIG_SUPPORT_VFAT
-
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
@@ -74,8 +48,6 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE           0x40004030
 #define CONFIG_SPL_MAX_SIZE            ((128 << 10) - 0x4030)
 
 #define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + (128 << 10))
@@ -88,9 +60,4 @@
 #define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
 
-/* SPL related SPI defines */
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
-#define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
-
 #endif /* _CONFIG_DB_88F6720_H */