video: Moving mx3fb.c to CONFIG_VIDEO

[platform/kernel/u-boot.git] / include / configs / davinci_sonata.h

diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index 82901b3..163f1a2 100644 (file)
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -19,7 +19,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * Define this to make U-Boot skip low level initialization when loaded
@@ -73,7 +72,6 @@
 /* Memory Info */
 /*=============*/
 #define CONFIG_SYS_MALLOC_LEN          (0x10000 + 128*1024)    /* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* reserved for initial data */
 #define CONFIG_SYS_MEMTEST_START       0x80000000      /* memtest start address */
 #define CONFIG_SYS_MEMTEST_END         0x81000000      /* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
@@ -103,37 +101,35 @@
 /* Network & Ethernet Configuration */
 /*==================================*/
 #define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM       1
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
 #ifdef CONFIG_SYS_USE_NAND
 #define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS             2
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_OVERWRITE           /* instead if obsoleted forceenv() */
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_SECT_SIZE   512     /* Env sector Size */
-#define CONFIG_ENV_SIZE                SZ_16K
+#define CONFIG_ENV_SIZE                (16 << 10)      /* 16 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET              0x0     /* Block 0--not used by bootcode */
-#define DEF_BOOTM              ""
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #else
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 #define CONFIG_ENV_IS_IN_FLASH
 #undef CONFIG_SYS_NO_FLASH
@@ -142,6 +138,7 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS     1               /* max number of flash banks */
 #define CONFIG_SYS_FLASH_SECT_SZ       0x20000         /* 128KB sect size AMD Flash */
 #define CONFIG_ENV_OFFSET              (CONFIG_SYS_FLASH_SECT_SZ*2)
+#define CONFIG_ENV_SIZE                CONFIG_SYS_FLASH_SECT_SZ
 #define PHYS_FLASH_1           0x02000000      /* CS2 Base address      */
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1    /* Flash Base for U-Boot */
 #define PHYS_FLASH_SIZE                0x2000000       /* Flash size 32MB       */
@@ -201,11 +198,13 @@
 #else
 #error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
 #endif
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  1       /* which serial port to use */
-#endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */