common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

[platform/kernel/u-boot.git] / include / configs / davinci_sffsdr.h

diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index e9cd5a6..f24eb7a 100644 (file)
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -22,20 +22,19 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /* Board */
 #define SFFSDR
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_USE_DSPLINK         /* This is to prevent U-Boot from
-                                * powering ON the DSP. */
+#define CONFIG_SYS_USE_DSPLINK         /* don't power up the DSP. */
+#define CONFIG_DISPLAY_CPUINFO
 /* SoC Configuration */
 #define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
-#define CONFIG_SYS_CLK_FREQ    297000000       /* Arm Clock frequency */
 #define CONFIG_SYS_TIMERBASE           0x01c21400      /* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK            27000000        /* Timer Input clock freq */
 #define CONFIG_SYS_HZ                  1000
+#define CONFIG_SOC_DM644X
 /* EEPROM definitions for Atmel 24LC64 EEPROM chip */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
@@ -54,9 +53,9 @@
 /* Serial Driver info */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    4               /* NS16550 register size */
+#define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size, byteorder */
 #define CONFIG_SYS_NS16550_COM1        0x01c20000      /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK         27000000        /* Input clock to NS16550 */
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK     /* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 #define CONFIG_BAUDRATE                115200          /* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
@@ -74,18 +73,19 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_NET_MULTI
 /* Flash & Environment */
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_NAND_DAVINCI
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_SECT_SIZE   2048    /* Env sector Size */
-#define CONFIG_ENV_SIZE                SZ_128K
+#define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */
-#define NAND_MAX_CHIPS         1
 #define CONFIG_ENV_OFFSET              0x0     /* Block 0--not used by bootcode */
 /* I2C switch definitions for PCA9543 chip */
 #define CONFIG_SYS_I2C_PCA9543_ADDR            0x70