powerpc/p4080ds: Move ICS refclk define into P4080DS.h

[platform/kernel/u-boot.git] / include / configs / davinci_schmoogie.h

diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 22d3808..967ebcc 100644 (file)
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -19,7 +19,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*=======*/
 /* Board */
@@ -27,19 +26,19 @@
 #define SCHMOOGIE
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
+#define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
 /*===================*/
 #define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
-#define CONFIG_SYS_CLK_FREQ    297000000       /* Arm Clock frequency */
 #define CONFIG_SYS_TIMERBASE           0x01c21400      /* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK            27000000        /* Timer Input clock freq */
 #define CONFIG_SYS_HZ                  1000
+#define CONFIG_SOC_DM644X
 /*=============*/
 /* Memory Info */
 /*=============*/
 #define CONFIG_SYS_MALLOC_LEN          (0x10000 + 256*1024)    /* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* reserved for initial data */
 #define CONFIG_SYS_MEMTEST_START       0x80000000      /* memtest start address */
 #define CONFIG_SYS_MEMTEST_END         0x81000000      /* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
@@ -52,9 +51,9 @@
 /*====================*/
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    4               /* NS16550 register size */
+#define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size, byteorder */
 #define CONFIG_SYS_NS16550_COM1        0x01c20000      /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK         27000000        /* Input clock to NS16550 */
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK     /* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 #define CONFIG_BAUDRATE                115200          /* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
@@ -69,6 +68,7 @@
 /* Network & Ethernet Configuration */
 /*==================================*/
 #define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM       1
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
@@ -76,16 +76,18 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_NET_MULTI
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS             2
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_SECT_SIZE   2048    /* Env sector Size */
-#define CONFIG_ENV_SIZE                SZ_128K
+#define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */
@@ -95,7 +97,6 @@
 /*=====================*/
 #define CONFIG_RTC_DS1307              /* RTC chip on SCHMOOGIE */
 #define CONFIG_SYS_I2C_RTC_ADDR        0x6f    /* RTC chip I2C address */
-#define CONFIG_HAS_UID
 #define CONFIG_UID_DS28CM00            /* Unique ID on SCHMOOGIE */
 #define CONFIG_SYS_UID_ADDR            0x50    /* UID chip I2C address */
 /*==============================*/