Merge branch 'master' of git://git.denx.de/u-boot-arm

[platform/kernel/u-boot.git] / include / configs / davinci_dvevm.h

diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index aab2afa..45214fa 100644 (file)
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -50,7 +50,7 @@
 /*=======*/
 #define DV_EVM
 #define CONFIG_SYS_NAND_SMALLPAGE
-#define CONFIG_SYS_USE_NOR
+#define CONFIG_SYS_USE_NAND
 #define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
@@ -72,13 +72,13 @@
 /* Memory Info */
 /*=============*/
 #define CONFIG_SYS_MALLOC_LEN          (0x10000 + 128*1024)    /* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* reserved for initial data */
 #define CONFIG_SYS_MEMTEST_START       0x80000000      /* memtest start address */
 #define CONFIG_SYS_MEMTEST_END         0x81000000      /* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
 #define CONFIG_STACKSIZE       (256*1024)      /* regular stack */
 #define PHYS_SDRAM_1           0x80000000      /* DDR Start */
 #define PHYS_SDRAM_1_SIZE      0x10000000      /* DDR size 256MB */
+
 #define DDR_8BANKS                             /* 8-bank DDR2 (256MB) */
 /*====================*/
 /* Serial Driver info */
@@ -134,20 +134,16 @@
 #define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
 #endif
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET              0x0     /* Block 0--not used by bootcode */
-#define DEF_BOOTM              ""
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #else
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 #define CONFIG_ENV_IS_IN_FLASH
 #undef CONFIG_SYS_NO_FLASH
@@ -233,11 +229,13 @@
 #define CONFIG_PREBOOT "usb start"
 #endif
 #endif
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  1       /* which serial port to use */
-#endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */