ARM: Remove unused stack and irq config defines

[platform/kernel/u-boot.git] / include / configs / davinci_dm355leopard.h

diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
index 5db720e..88e6673 100644 (file)
--- a/include/configs/davinci_dm355leopard.h
+++ b/include/configs/davinci_dm355leopard.h
@@ -23,10 +23,8 @@
 #define DAVINCI_DM355LEOPARD
 
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is a 3rd stage loader */
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_SYS_NO_FLASH            /* that is, no *NOR* flash */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_DISPLAY_CPUINFO
 
 /* SoC Configuration */
 #define CONFIG_ARM926EJS                               /* arm926ejs CPU */
@@ -46,7 +44,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE    -4
 #define CONFIG_SYS_NS16550_COM1                0x01c20000
 #define CONFIG_SYS_NS16550_CLK         CONFIG_SYS_HZ_CLOCK
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                        115200
 
@@ -55,7 +52,6 @@
 #define CONFIG_DM9000_BASE             0x04000000
 #define DM9000_IO                      CONFIG_DM9000_BASE
 #define DM9000_DATA                    (CONFIG_DM9000_BASE + 16)
-#define CONFIG_NET_MULTI
 
 /* I2C */
 #define CONFIG_HARD_I2C
@@ -65,12 +61,12 @@
 
 /* NAND */
 #define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS             2
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_HW_ECC
 
 #define CONFIG_SYS_NAND_BASE_LIST      { 0x02000000, }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_MAX_CHIPS      1
 
 /* U-Boot command configuration */
 #include <config_cmd_default.h>
@@ -86,6 +82,10 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
+
 #ifdef CONFIG_NAND_DAVINCI
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
@@ -99,7 +99,6 @@
 #define CONFIG_MX_CYCLIC
 
 /* U-Boot general configuration */
-#undef CONFIG_USE_IRQ                          /* No IRQ/FIQ in U-Boot */
 #define CONFIG_BOOTFILE                "uImage"        /* Boot file name */
 #define CONFIG_SYS_PROMPT      "DM355 LEOPARD # "
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size  */
@@ -107,14 +106,12 @@
                (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_LONGHELP
 
 #ifdef CONFIG_NAND_DAVINCI
 #define CONFIG_ENV_SIZE                (256 << 10)     /* 256 KiB */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET      0x3C0000
-#define CONFIG_SYS_64BIT_VSPRINTF              /* needed for nand_util.c */
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE
 #endif
@@ -132,9 +129,7 @@
 #define CONFIG_NET_RETRY_COUNT 10
 
 /* U-Boot memory configuration */
-#define CONFIG_STACKSIZE               (256 << 10)     /* 256 KiB */
 #define CONFIG_SYS_MALLOC_LEN          (1 << 20)       /* 1 MiB */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* for initial data */
 #define CONFIG_SYS_MEMTEST_START       0x87000000      /* physical address */
 #define CONFIG_SYS_MEMTEST_END         0x88000000      /* test 16MB RAM */
 
@@ -159,4 +154,10 @@
 #define MTDPARTS_DEFAULT       \
        "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
 
+#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR                \
+       (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */