qong: enable support for compressed images

[platform/kernel/u-boot.git] / include / configs / da850evm.h

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 7bf6336..4c14370 100644 (file)
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -27,6 +27,8 @@
  * Board
  */
 #define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_USE_SPIFLASH
+
 
 /*
  * SoC Configuration
@@ -40,12 +42,15 @@
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ                  1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE           0xc1080000
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_L2CACHE_OFF
 
 /*
  * Memory Info
  */
 #define CONFIG_SYS_MALLOC_LEN  (0x10000 + 1*1024*1024) /* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE       128 /* reserved for initial data */
 #define PHYS_SDRAM_1           DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
 #define PHYS_SDRAM_1_SIZE      (64 << 20) /* SDRAM size 64MB */
 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
@@ -71,6 +76,16 @@
 #define CONFIG_BAUDRATE                115200          /* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_DAVINCI_SPI
+#define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
+#define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
+#define CONFIG_SF_DEFAULT_SPEED                30000000
+#define CONFIG_ENV_SPI_MAX_HZ  CONFIG_SF_DEFAULT_SPEED
+
 /*
  * I2C Configuration
  */
@@ -78,6 +93,7 @@
 #define CONFIG_DRIVER_DAVINCI_I2C
 #define CONFIG_SYS_I2C_SPEED           25000
 #define CONFIG_SYS_I2C_SLAVE           10 /* Bogus, master-only in U-Boot */
+#define CONFIG_SYS_I2C_EXPANDER_ADDR   0x20
 
 /*
  * Flash & Environment
@@ -99,28 +115,53 @@
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
 #define NAND_MAX_CHIPS                 1
-#define DEF_BOOTM                      ""
 #endif
 
 /*
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM       0
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
+#endif
+
+#ifdef CONFIG_USE_NOR
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS     1 /* max number of flash banks */
+#define CONFIG_SYS_FLASH_SECT_SZ       (128 << 10) /* 128KB */
+#define CONFIG_ENV_OFFSET              (CONFIG_SYS_FLASH_SECT_SZ * 3)
+#define CONFIG_ENV_SIZE                        (10 << 10) /* 10KB */
+#define CONFIG_SYS_FLASH_BASE          DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
+#define PHYS_FLASH_SIZE                        (8 << 20) /* Flash size 8MB */
+#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
+              + 3)
+#define CONFIG_ENV_SECT_SIZE           CONFIG_SYS_FLASH_SECT_SZ
+#endif
+
+#ifdef CONFIG_USE_SPIFLASH
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE                        (64 << 10)
+#define CONFIG_ENV_OFFSET              (256 << 10)
+#define CONFIG_ENV_SECT_SIZE           (64 << 10)
+#define CONFIG_SYS_NO_FLASH
 #endif
 
 /*
  * U-Boot general configuration
  */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT      "DA850-evm > " /* Command Prompt */
+#define CONFIG_SYS_PROMPT      "U-Boot > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16 /* max number of command args */
@@ -139,11 +180,14 @@
  * Linux Information
  */
 #define LINUX_BOOT_PARAM_ADDR  (PHYS_SDRAM_1 + 0x100)
+#define CONFIG_HWCONFIG                /* enable hwconfig */
 #define CONFIG_CMDLINE_TAG
+#define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTARGS                \
        "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
 #define CONFIG_BOOTDELAY       3
+#define CONFIG_EXTRA_ENV_SETTINGS      "hwconfig=dsp:wake=yes"
 
 /*
  * U-Boot commands
@@ -179,6 +223,14 @@
 #define CONFIG_CMD_UBIFS
 #endif
 
+#ifdef CONFIG_USE_SPIFLASH
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_FLASH
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SAVEENV
+#endif
+
 #if !defined(CONFIG_USE_NAND) && \
        !defined(CONFIG_USE_NOR) && \
        !defined(CONFIG_USE_SPIFLASH)
@@ -192,5 +244,5 @@
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0xc0000000
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
-                                       CONFIG_SYS_GBL_DATA_SIZE)
+                                       GENERATED_GBL_DATA_SIZE)
 #endif /* __CONFIG_H */