Merge branch 'master' of git://git.denx.de/u-boot-spi

[platform/kernel/u-boot.git] / include / configs / da830evm.h

diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index cca75ce..00e92a6 100644 (file)
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -36,6 +36,7 @@
 #define CONFIG_MACH_DAVINCI_DA830_EVM
 #define CONFIG_ARM926EJS               /* arm926ejs CPU core */
 #define CONFIG_SOC_DA8XX               /* TI DA8xx SoC */
+#define CONFIG_SOC_DA830               /* TI DA830 SoC */
 #define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ          24000000
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
@@ -53,7 +54,6 @@
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
                                                (32 << 20))
 #define CONFIG_NR_DRAM_BANKS   1 /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE       (256*1024) /* regular stack */
 
 /*
  * Serial Driver info
@@ -65,7 +65,6 @@
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 #define CONFIG_BAUDRATE                115200          /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * I2C Configuration
@@ -87,7 +86,6 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM       1
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
@@ -112,11 +110,9 @@
 #define CONFIG_SYS_NAND_CS             3
 #define CONFIG_SYS_NAND_BASE           DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 #define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
-#define CONFIG_SYS_CLE_MASK            0x10
-#define CONFIG_SYS_ALE_MASK            0x8
+#define CONFIG_SYS_NAND_MASK_CLE               0x10
+#define CONFIG_SYS_NAND_MASK_ALE               0x8
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS                 1
 #endif
 
 #ifdef CONFIG_USE_NOR
@@ -161,7 +157,6 @@
 /*
  * U-Boot general configuration
  */
-#undef CONFIG_USE_IRQ                  /* No IRQ/FIQ in U-Boot */
 #undef CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
@@ -174,7 +169,6 @@
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE   /* Won't work with hush so far, may be later */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
@@ -205,6 +199,10 @@
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
 
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
+
 #ifndef CONFIG_DRIVER_TI_EMAC
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_DHCP
@@ -229,6 +227,28 @@
 #define CONFIG_CMD_SAVEENV
 #endif
 
+/* SD/MMC configuration */
+#ifndef CONFIG_USE_NAND
+#define CONFIG_MMC
+#define CONFIG_DAVINCI_MMC_SD1
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DAVINCI_MMC
+#endif
+
+/*
+ * Enable MMC commands only when
+ * MMC support is present
+ */
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX)
+#define CONFIG_DOS_PARTITION   /* include support for FAT/storage */
+#define CONFIG_CMD_FAT         /* include support for FAT cmd */
+#endif
+
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#endif
+
 #if !defined(CONFIG_USE_NAND) && \
        !defined(CONFIG_USE_NOR) && \
        !defined(CONFIG_USE_SPIFLASH)
@@ -247,8 +267,6 @@
 
 #define CONFIG_USB_STORAGE     /* MSC class support */
 #define CONFIG_CMD_STORAGE     /* inclue support for usb-storage cmd */
-#define CONFIG_CMD_FAT         /* inclue support for FAT/storage */
-#define CONFIG_DOS_PARTITION   /* inclue support for FAT/storage */
 
 #ifdef CONFIG_USB_KEYBOARD     /* HID class support */
 #define CONFIG_SYS_USB_EVENT_POLL