Merge with git://www.denx.de/git/u-boot.git

[platform/kernel/u-boot.git] / include / configs / cpci5200.h

diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 711e348..ce4ea1f 100644 (file)
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -50,11 +50,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot           */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -92,12 +87,6 @@
 #define CONFIG_NS8382X         1
 #endif
 
-#define ADD_PCI_CMD            CFG_CMD_PCI
-
-#else                          /* MPC5100 */
-
-#define ADD_PCI_CMD            0       /* no CFG_CMD_PCI */
-
 #endif
 
 /* Partitions */
@@ -107,28 +96,35 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD            CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD            0
 #endif
 
 /*
- * Supported commands
+ * BOOTP options
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_FAT    | \
-                                CFG_CMD_IDE    | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_BSP    | \
-                                CFG_CMD_ELF    | \
-                                CFG_CMD_EXT2   | \
-                                CFG_CMD_DATE   | \
-                                ADD_PCI_CMD      )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_DATE
 
 #if (TEXT_BASE == 0xFF000000)  /* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT         1
@@ -154,9 +150,9 @@
        "netdev=eth0\0" \
        "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
        "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
-       "net_vxworks=phypower 1;sleep 2;tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
-       "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
-       "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
+       "net_vxworks=phypower 1;sleep 2;tftp ${loadaddr} ${image};run vxworks_args;bootvx\0" \
+       "vxworks_args=setenv bootargs fec(0,0)${host}:${image} h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script}\0" \
+       "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script} o=fec0 \0" \
        "loadaddr=01000000\0" \
        "serverip=192.168.2.99\0" \
        "gatewayip=10.0.0.79\0" \
@@ -179,7 +175,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
@@ -277,7 +273,7 @@
  */
 #define CFG_LONGHELP           /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -295,6 +291,11 @@
 
 #define CFG_VXWORKS_MAC_PTR    0x00000000      /* Pass Ethernet MAC to VxWorks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */