common: Move CONFIG_BOOTARGS to Kconfig

[platform/kernel/u-boot.git] / include / configs / corvus.h

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 8b3c715..e47f06b 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -35,9 +35,7 @@
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
@@ -45,7 +43,6 @@
 #define CONFIG_AT91_GPIO_PULLUP        1       /* keep pullups on peripheral pins */
 
 /* serial console */
-#define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
 
@@ -54,7 +51,6 @@
 #define CONFIG_RED_LED         AT91_PIN_PD31   /* this is the user1 led */
 #define CONFIG_GREEN_LED       AT91_PIN_PD0    /* this is the user2 led */
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -64,21 +60,13 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_NAND
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
-
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
+       (CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -100,29 +88,16 @@
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-#define CONFIG_DOS_PARTITION
-#define CONFIG_USB_STORAGE
-
-/* USB DFU support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
 /* DFU class support */
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_NAND
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   (SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
 
-#define CONFIG_SYS_CACHELINE_SIZE      SZ_8K
 #define CONFIG_SYS_LOAD_ADDR   ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              0x100000
 #define CONFIG_ENV_OFFSET_REDUND       0x180000
 #define CONFIG_ENV_SIZE                        SZ_128K
@@ -130,14 +105,6 @@
 #define CONFIG_BOOTCOMMAND                                             \
        "nand read 0x70000000 0x200000 0x300000;"                       \
        "bootm 0x70000000"
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk "                             \
-       "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
-       "256k(env),256k(env_redundant),256k(spare),"                    \
-       "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
-       "root=/dev/mtdblock7 rw rootfstype=jffs2"
-
-#define CONFIG_BAUDRATE                        115200
 
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
@@ -162,13 +129,6 @@
 #define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE                (SZ_2K)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_ECC