Convert CONFIG_SPL_NAND_BASE et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / corvus.h

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 8819602..55f77e4 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common board functions for siemens AT91SAM9G45 based boards
  * (C) Copyright 2013 Siemens AG
@@ -7,8 +8,6 @@
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -24,8 +23,6 @@
  * hex number here!
  */
 
-#define CONFIG_SYS_TEXT_BASE  0x72000000
-
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
@@ -39,7 +36,6 @@
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP        1       /* keep pullups on peripheral pins */
 
 /* serial console */
@@ -56,12 +52,8 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000
 
@@ -70,7 +62,6 @@
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -80,6 +71,7 @@
 #define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC8
+#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
 #endif
 
 /* Ethernet */
@@ -88,9 +80,6 @@
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
 /* DFU class support */
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   (SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
@@ -98,27 +87,10 @@
 #define CONFIG_SYS_LOAD_ADDR   ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_OFFSET              0x100000
-#define CONFIG_ENV_OFFSET_REDUND       0x180000
-#define CONFIG_ENV_SIZE                        SZ_128K
 
 #define CONFIG_BOOTCOMMAND                                             \
        "nand read 0x70000000 0x200000 0x300000;"                       \
        "bootm 0x70000000"
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk "                             \
-       "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
-       "256k(env),256k(env_redundant),256k(spare),"                    \
-       "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
-       "root=/dev/mtdblock7 rw rootfstype=jffs2"
-
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE +    \
-                                sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
 
 /*
  * Size of malloc() pool
@@ -127,17 +99,12 @@
                                SZ_4M, 0x1000)
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE           0x300000
 #define CONFIG_SPL_MAX_SIZE            (12 * SZ_1K)
 #define CONFIG_SPL_STACK               (SZ_16K)
 
 #define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE                (SZ_2K)
 
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x20000
@@ -165,4 +132,7 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
+#define CONFIG_SPL_PAD_TO              CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN             CONFIG_SPL_PAD_TO
+
 #endif