Merge tag 'next-20220328' of https://source.denx.de/u-boot/custodians/u-boot-video...

[platform/kernel/u-boot.git] / include / configs / corvus.h

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 66fdbc2..18bb554 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -23,39 +23,19 @@
  * hex number here!
  */
 
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_GPIO_PULLUP        1       /* keep pullups on peripheral pins */
-
 /* serial console */
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
 
 /* LED */
-#define CONFIG_AT91_LED
 #define CONFIG_RED_LED         AT91_PIN_PD31   /* this is the user1 led */
 #define CONFIG_GREEN_LED       AT91_PIN_PD0    /* this is the user2 led */
 
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000
 
@@ -75,60 +55,26 @@
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC8
 #endif
 
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
 /* DFU class support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE   (SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
 
-#define CONFIG_SYS_LOAD_ADDR   ATMEL_BASE_CS6
-
 /* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_OFFSET              0x100000
-#define CONFIG_ENV_OFFSET_REDUND       0x180000
-#define CONFIG_ENV_SIZE                        SZ_128K
-
-#define CONFIG_BOOTCOMMAND                                             \
-       "nand read 0x70000000 0x200000 0x300000;"                       \
-       "bootm 0x70000000"
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + \
-                               SZ_4M, 0x1000)
 
 /* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE           0x300000
 #define CONFIG_SPL_MAX_SIZE            (12 * SZ_1K)
 #define CONFIG_SPL_STACK               (SZ_16K)
 
 #define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE                (SZ_2K)
 
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x20000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
-#define CONFIG_SYS_NAND_PAGE_SIZE      SZ_2K
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (SZ_128K)
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCSIZE                256
 #define CONFIG_SYS_NAND_ECCBYTES       3
-#define CONFIG_SYS_NAND_OOBSIZE                64
 #define CONFIG_SYS_NAND_ECCPOS         { 40, 41, 42, 43, 44, 45, 46, 47, \
                                          48, 49, 50, 51, 52, 53, 54, 55, \
                                          56, 57, 58, 59, 60, 61, 62, 63, }
@@ -140,4 +86,7 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
+#define CONFIG_SPL_PAD_TO              CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN             CONFIG_SPL_PAD_TO
+
 #endif