+/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008
- * Graeme Russ, graeme.russ@gmail.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
+ * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
*/
-#include <asm/ibmpc.h>
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_COREBOOT
-#define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_LAST_STAGE_INIT
-#define CONFIG_SYS_VSNPRINTF
-#define CONFIG_ZBOOT_32
-#define CONFIG_PHYSMEM
-#define CONFIG_SYS_EARLY_PCI_INIT
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-
-#define CONFIG_LMB
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_BOOTSTAGE
-#define CONFIG_BOOTSTAGE_REPORT
-#define CONFIG_BOOTSTAGE_FDT
-#define CONFIG_CMD_BOOTSTAGE
-/* Place to stash bootstage data from first-stage U-Boot */
-#define CONFIG_BOOTSTAGE_STASH 0x0110f000
-#define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc
-#define CONFIG_BOOTSTAGE_USER_COUNT 60
-
-#define CONFIG_LZO
-#define CONFIG_FIT
-#undef CONFIG_ZLIB
-#undef CONFIG_GZIP
-
-/*-----------------------------------------------------------------------
- * Watchdog Configuration
- */
-#undef CONFIG_WATCHDOG
-#undef CONFIG_HW_WATCHDOG
-
-/* SATA AHCI storage */
-
-#define CONFIG_SCSI_AHCI
-
-#ifdef CONFIG_SCSI_AHCI
-#define CONFIG_LIBATA
-#define CONFIG_SYS_64BIT_LBA
-#define CONFIG_SATA_INTEL 1
-#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \
- PCI_DEVICE_ID_INTEL_NM10_AHCI}, \
- {PCI_VENDOR_ID_INTEL, \
- PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \
- {PCI_VENDOR_ID_INTEL, \
- PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \
- {PCI_VENDOR_ID_INTEL, \
- PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
- CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
-/* Generic TPM interfaced through LPC bus */
-#define CONFIG_TPM
-#define CONFIG_TPM_TIS_LPC
-#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000
-
-/*-----------------------------------------------------------------------
- * Real Time Clock Configuration
- */
-#define CONFIG_RTC_MC146818
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
-#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS
-
-/*-----------------------------------------------------------------------
- * Serial Configuration
- */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 1843200
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \
- 9600, 19200, 38400, 115200}
-#define CONFIG_SYS_NS16550_COM1 UART0_BASE
-#define CONFIG_SYS_NS16550_COM2 UART1_BASE
-#define CONFIG_SYS_NS16550_PORT_MAPPED
-
-#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,eserial0\0" \
- "stdout=vga,eserial0,cbmem\0" \
- "stderr=vga,eserial0,cbmem\0"
-
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_STDIO_DEREGISTER
-#define CONFIG_CBMEM_CONSOLE
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-
-#define CONFIG_SUPPORT_VFAT
-/************************************************************
- * ATAPI support (experimental)
- ************************************************************/
-#define CONFIG_ATAPI
-
-/************************************************************
- * DISK Partition support
- ************************************************************/
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION /* Experimental */
-
-#define CONFIG_CMD_PART
-#define CONFIG_CMD_CBFS
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_PARTITION_UUIDS
-
-/*-----------------------------------------------------------------------
- * Video Configuration
- */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_COREBOOT
-#define CONFIG_VIDEO_SW_CURSOR
-#define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_I8042_KBD
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* x86 GPIOs are accessed through a PCI device */
-#define CONFIG_INTEL_ICH6_GPIO
-
-/*-----------------------------------------------------------------------
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_TRACE
-#define CONFIG_CMD_TRACE
-#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
-#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
-#define CONFIG_TRACE_EARLY
-#define CONFIG_TRACE_EARLY_ADDR 0x01400000
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ECHO
-#undef CONFIG_CMD_FLASH
-#define CONFIG_CMD_FPGA
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_IO
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_SOURCE
-#define CONFIG_CMD_TIME
-#define CONFIG_CMD_GETTIME
-#define CONFIG_CMD_XIMG
-#define CONFIG_CMD_SCSI
-
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-#define CONFIG_CMD_ZBOOT
-#define CONFIG_CMD_ELF
-
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS \
- "root=/dev/sdb3 init=/sbin/init rootwait ro"
-#define CONFIG_BOOTCOMMAND \
- "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
-
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 512
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + \
- 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x01000000
-#define CONFIG_SYS_LOAD_ADDR 0x02000000
-
-/*-----------------------------------------------------------------------
- * SDRAM Configuration
- */
-#define CONFIG_NR_DRAM_BANKS 4
-
-/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/
-#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY
-#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY
-#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
-#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
-
-/*-----------------------------------------------------------------------
- * CPU Features
- */
-
-#define CONFIG_SYS_X86_TSC_TIMER
-#define CONFIG_SYS_PCAT_INTERRUPTS
-#define CONFIG_SYS_PCAT_TIMER
-#define CONFIG_SYS_NUM_IRQS 16
-
-/*-----------------------------------------------------------------------
- * Memory organization:
- * 32kB Stack
- * 16kB Cache-As-RAM @ 0x19200000
- * 256kB Monitor
- * (128kB + Environment Sector Size) malloc pool
- */
-#define CONFIG_SYS_STACK_SIZE (32 * 1024)
-#define CONFIG_SYS_CAR_ADDR 0x19200000
-#define CONFIG_SYS_CAR_SIZE (16 * 1024)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (0x20000 + 128 * 1024)
-
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*-----------------------------------------------------------------------
- * FLASH configuration
- */
-#define CONFIG_ICH_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SPI_FLASH_GIGADEVICE
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SF_TEST
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI
-
-/*-----------------------------------------------------------------------
- * Environment configuration
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x01000
-
-/*-----------------------------------------------------------------------
- * PCI configuration
- */
-#define CONFIG_PCI
-
-#define CONFIG_CROS_EC
-#define CONFIG_CROS_EC_LPC
-#define CONFIG_CMD_CROS_EC
-#define CONFIG_ARCH_EARLY_INIT_R
-
-/*-----------------------------------------------------------------------
- * USB configuration
- */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_PCI
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
+#define SPLASH_SETTINGS "splashsource=virtio_fs\0" \
+ "splashimage=0x1000000\0"
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_TFTP_TSIZE
-#define CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
+#include <configs/x86-common.h>
-#define CONFIG_CMD_USB
+#define CFG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_STD_DEVICES_SETTINGS
+/* ATA/IDE support */
#endif /* __CONFIG_H */