Convert CONFIG_PCI_GT64120 to Kconfig

[platform/kernel/u-boot.git] / include / configs / controlcenterdc.h

diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index ff385d9..5da2778 100644 (file)
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -8,84 +8,21 @@
 #define _CONFIG_CONTROLCENTERDC_H
 
 /*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_CUSTOMER_BOARD_SUPPORT
-
-/*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
 
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
-#define CONFIG_SYS_SCSI_MAX_LUN                1
-#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                        CONFIG_SYS_SCSI_MAX_LUN)
-
 /* Environment in SPI NOR flash */
 
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-/*
- * Software (bit-bang) MII driver configuration
- */
-#define CONFIG_BITBANGMII_MULTI
-
-/* SPL */
-/*
- * Select the boot device here
- *
- * Currently supported are:
- * SPL_BOOT_SPI_NOR_FLASH      - Booting via SPI NOR flash
- * SPL_BOOT_SDIO_MMC_CARD      - Booting via SDIO/MMC card (partition 1)
- */
-#define SPL_BOOT_SPI_NOR_FLASH         1
-#define SPL_BOOT_SDIO_MMC_CARD         2
-#define CONFIG_SPL_BOOT_DEVICE         SPL_BOOT_SPI_NOR_FLASH
-
-/* Defines for SPL */
-#define CONFIG_SPL_SIZE                        (160 << 10)
-
-#if defined(CONFIG_SECURED_MODE_IMAGE)
-#define CONFIG_SPL_MAX_SIZE            (CONFIG_SPL_SIZE - 0x2614)
-#else
-#define CONFIG_SPL_MAX_SIZE            (CONFIG_SPL_SIZE - 0x30)
-#endif
-
-#define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + CONFIG_SPL_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE                (16 << 10)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
-#define CONFIG_SPL_STACK               (0x40000000 + ((212 - 16) << 10))
-#define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
-/* SPL related MMC defines */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER      0x00180000      /* in SDRAM */
-#endif
-#endif
-
 /*
  * Environment Configuration
  */
 
 #define CONFIG_HOSTNAME                "ccdc"
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
-#define CONFIG_BOOTFILE                "ccdc.img"
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                              \
        "netdev=eth1\0"                                         \