Merge tag 'mips-pull-2020-06-29' of https://gitlab.denx.de/u-boot/custodians/u-boot...

[platform/kernel/u-boot.git] / include / configs / controlcenterd.h

diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 276c733..823586c 100644 (file)
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD
 #endif
@@ -36,7 +38,6 @@
 
 /* High Level Configuration Options */
 #define CONFIG_CONTROLCENTERD
-#define CONFIG_MP                      /* support multiple processors */
 
 #define CONFIG_ENABLE_36BIT_PHYS
 
@@ -122,9 +123,6 @@
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
-#define CONFIG_SYS_MEMTEST_START       0x00000000
-#define CONFIG_SYS_MEMTEST_END         0x3fffffff
-
 #ifdef CONFIG_TRAILBLAZER
 #define CONFIG_SPD_EEPROM
 #define SPD_EEPROM_ADDRESS 0x52
@@ -155,7 +153,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX              2
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -178,28 +175,14 @@
 #define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
 #define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 
-#ifndef CONFIG_TRAILBLAZER
-#endif
-
 #define CONFIG_PCA9698                 /* NXP PCA9698 */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
-#ifndef CONFIG_TRAILBLAZER
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
-
-#define CONFIG_SF_DEFAULT_SPEED                10000000
-#define CONFIG_SF_DEFAULT_MODE         0
-#endif
-
 /*
  * MMC
  */
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 
 #ifndef CONFIG_TRAILBLAZER
@@ -220,7 +203,6 @@
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
-#define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
 
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0xc0000000
 #ifdef CONFIG_PHYS_64BIT
@@ -256,11 +238,9 @@
 /*
  * Ethernet
  */
-#define CONFIG_TSEC_ENET
 
 #define CONFIG_TSECV2
 
-#define CONFIG_MII                     /* MII PHY management */
 #define CONFIG_TSEC1           1
 #define CONFIG_TSEC1_NAME      "eTSEC1"
 #define CONFIG_TSEC2           1
@@ -291,42 +271,17 @@
  * Environment
  */
 #if defined(CONFIG_TRAILBLAZER)
-#define CONFIG_ENV_SIZE                0x2000          /* 8KB */
-#elif defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_ENV_SPI_BUS     0
-#define CONFIG_ENV_SPI_CS      0
-#define CONFIG_ENV_SPI_MAX_HZ  10000000
-#define CONFIG_ENV_SPI_MODE    0
-#define CONFIG_ENV_SIZE                0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET      0x100000        /* 1MB */
-#define CONFIG_ENV_SECT_SIZE   0x10000
 #elif defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_SYS_MMC_ENV_DEV 0
 #endif
 
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-
-/*
- * Command line configuration.
- */
-
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 #ifndef CONFIG_TRAILBLAZER
 /*
  * Board initialisation callbacks
  */
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_MISC_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
-#else /* CONFIG_TRAILBLAZER */
-
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
 #endif /* CONFIG_TRAILBLAZER */
 
 /*
@@ -354,7 +309,7 @@
 
 #else
 
-#define CONFIG_HOSTNAME                controlcenterd
+#define CONFIG_HOSTNAME                "controlcenterd"
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       u-boot.bin      /* U-Boot image on TFTP */