configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / colibri_pxa270.h

diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index f5f648d..975f745 100644 (file)
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Toradex Colibri PXA270 configuration file
  *
  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
  * Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef        __CONFIG_H
@@ -13,30 +12,12 @@
 /*
  * High Level Board Configuration Options
  */
-#define        CONFIG_CPU_PXA27X               1       /* Marvell PXA270 CPU */
 /* Avoid overwriting factory configuration block */
 #define CONFIG_BOARD_SIZE_LIMIT                0x40000
 
-/* We will never enable dcache because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
 /*
  * Environment settings
  */
-#define        CONFIG_ENV_OVERWRITE
-#define        CONFIG_SYS_MALLOC_LEN           (128 * 1024)
-#define        CONFIG_ARCH_CPU_INIT
-#define        CONFIG_BOOTCOMMAND                                              \
-       "if fatload mmc 0 0xa0000000 uImage; then "                     \
-               "bootm 0xa0000000; "                                    \
-       "fi; "                                                          \
-       "if usb reset && fatload usb 0 0xa0000000 uImage; then "        \
-               "bootm 0xa0000000; "                                    \
-       "fi; "                                                          \
-       "bootm 0xc0000;"
-#define        CONFIG_TIMESTAMP
-#define        CONFIG_CMDLINE_TAG
-#define        CONFIG_SETUP_MEMORY_TAGS
 
 /*
  * Serial Console Configuration
@@ -47,11 +28,10 @@
  */
 
 /* I2C support */
-#ifdef CONFIG_SYS_I2C
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 #define CONFIG_SYS_I2C_PXA
 #define CONFIG_PXA_STD_I2C
 #define CONFIG_PXA_PWR_I2C
-#define CONFIG_SYS_I2C_SPEED           100000
 #endif
 
 /* LCD support */
@@ -75,8 +55,6 @@
 #define        CONFIG_BOOTP_BOOTFILESIZE
 #endif
 
-#define        CONFIG_SYS_DEVICE_NULLDEV       1
-
 /*
  * Clock Configuration
  */
@@ -85,17 +63,12 @@
 /*
  * DRAM Map
  */
-#define        CONFIG_NR_DRAM_BANKS            1               /* We have 1 bank of DRAM */
 #define        PHYS_SDRAM_1                    0xa0000000      /* SDRAM Bank #1 */
 #define        PHYS_SDRAM_1_SIZE               0x04000000      /* 64 MB */
 
 #define        CONFIG_SYS_DRAM_BASE            0xa0000000      /* CS0 */
 #define        CONFIG_SYS_DRAM_SIZE            0x04000000      /* 64 MB DRAM */
 
-#define CONFIG_SYS_MEMTEST_START       0xa0400000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM */
-
-#define        CONFIG_SYS_LOAD_ADDR            PHYS_SDRAM_1
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define        CONFIG_SYS_INIT_SP_ADDR         0x5c010000
 
@@ -107,30 +80,20 @@
 #define        PHYS_FLASH_SIZE                 0x02000000      /* 32 MB */
 #define        CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 
-#define        CONFIG_SYS_FLASH_CFI
-#define        CONFIG_FLASH_CFI_DRIVER         1
 #define        CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
 
 #define        CONFIG_SYS_MAX_FLASH_SECT       (4 + 255)
-#define        CONFIG_SYS_MAX_FLASH_BANKS      1
 
 #define        CONFIG_SYS_FLASH_ERASE_TOUT     (25 * CONFIG_SYS_HZ)
 #define        CONFIG_SYS_FLASH_WRITE_TOUT     (25 * CONFIG_SYS_HZ)
 #define        CONFIG_SYS_FLASH_LOCK_TOUT      (25 * CONFIG_SYS_HZ)
 #define        CONFIG_SYS_FLASH_UNLOCK_TOUT    (25 * CONFIG_SYS_HZ)
-
-#define        CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
-#define        CONFIG_SYS_FLASH_PROTECTION             1
 #endif
 
 #define        CONFIG_SYS_MONITOR_BASE         0x0
 #define        CONFIG_SYS_MONITOR_LEN          0x40000
 
 /* Skip factory configuration block */
-#define        CONFIG_ENV_ADDR                 \
-                       (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
-#define        CONFIG_ENV_SIZE                 0x40000
-#define        CONFIG_ENV_SECT_SIZE            0x40000
 
 /*
  * GPIO settings