* Toradex Colibri PXA270 configuration file
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2015 Marcel Ziswiler <marcel@ziswiler.com>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_H
+#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
-#define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */
-
-#undef BOARD_LATE_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-#undef CONFIG_USE_IRQ
-#undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_TEXT_BASE 0x0
+/* Avoid overwriting factory configuration block */
+#define CONFIG_BOARD_SIZE_LIMIT 0x40000
/*
* Environment settings
*/
-#define CONFIG_ENV_SIZE 0x4000
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE 128
-
-#define CONFIG_ENV_OVERWRITE /* override default environment */
-
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
+#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
- "if mmc init && fatload mmc 0 0xa0000000 uImage; then " \
+ "if fatload mmc 0 0xa0000000 uImage; then " \
"bootm 0xa0000000; " \
"fi; " \
"if usb reset && fatload usb 0 0xa0000000 uImage; then " \
"bootm 0xa0000000; " \
"fi; " \
- "bootm 0x80000;"
+ "bootm 0xc0000;"
#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-
#define CONFIG_LZMA /* LZMA compression support */
+#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
+#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
*/
#include <config_cmd_default.h>
+#undef CONFIG_CMD_LOADB /* Both together */
+#undef CONFIG_CMD_LOADS /* saves 10 KB */
#define CONFIG_CMD_NET
#define CONFIG_CMD_ENV
#undef CONFIG_CMD_IMLS
/*
* Networking Configuration
- * chip on the Voipac PXA270 board
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
-#define CONFIG_NET_MULTI 1
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x08000000
#define DM9000_IO (CONFIG_DM9000_BASE)
#endif
/*
- * MMC Card Configuration
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_PXA_MMC
-#define CONFIG_SYS_MMC_BASE 0xF0000000
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
-/*
- * KGDB
- */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#undef CONFIG_SYS_LONGHELP /* Saves 10 KB */
#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "$ "
#else
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_DEVICE_NULLDEV 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE 1
/*
* Clock Configuration
*/
-#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
-#define CONFIG_SYS_CPUSPEED 0x290 /* 520 MHz */
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
+#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
/*
* DRAM Map
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#define CONFIG_SYS_LOAD_ADDR (0xa1000000)
+#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
/*
* NOR FLASH
#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_ERASE_TOUT (25 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT (25 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_FLASH_PROTECTION 1
#else /* No flash */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_NOWHERE
#endif
-#define CONFIG_SYS_MONITOR_BASE 0x000000
+#define CONFIG_SYS_MONITOR_BASE 0x0
#define CONFIG_SYS_MONITOR_LEN 0x40000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SECT_SIZE 0x40000
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
+/* Skip factory configuration block */
+#define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
+#define CONFIG_ENV_SIZE 0x40000
+#define CONFIG_ENV_SECT_SIZE 0x40000
/*
* GPIO settings
*/
#define CONFIG_SYS_GPSR0_VAL 0x00000000
#define CONFIG_SYS_GPSR1_VAL 0x00020000
-#define CONFIG_SYS_GPSR2_VAL 0x0002C000
+#define CONFIG_SYS_GPSR2_VAL 0x0002c000
#define CONFIG_SYS_GPSR3_VAL 0x00000000
#define CONFIG_SYS_GPCR0_VAL 0x00000000
#define CONFIG_SYS_GPCR2_VAL 0x00000000
#define CONFIG_SYS_GPCR3_VAL 0x00000000
-#define CONFIG_SYS_GPDR0_VAL 0x08000000
-#define CONFIG_SYS_GPDR1_VAL 0x0002A981
-#define CONFIG_SYS_GPDR2_VAL 0x0202FC00
-#define CONFIG_SYS_GPDR3_VAL 0x00000000
+#define CONFIG_SYS_GPDR0_VAL 0xc8008000
+#define CONFIG_SYS_GPDR1_VAL 0xfc02a981
+#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff
+#define CONFIG_SYS_GPDR3_VAL 0x0061e804
-#define CONFIG_SYS_GAFR0_L_VAL 0x00100000
-#define CONFIG_SYS_GAFR0_U_VAL 0x00C00010
-#define CONFIG_SYS_GAFR1_L_VAL 0x999A901A
-#define CONFIG_SYS_GAFR1_U_VAL 0xAAA00008
-#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA
-#define CONFIG_SYS_GAFR2_U_VAL 0x0109A000
-#define CONFIG_SYS_GAFR3_L_VAL 0x54000300
-#define CONFIG_SYS_GAFR3_U_VAL 0x00024001
+#define CONFIG_SYS_GAFR0_L_VAL 0x80100000
+#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010
+#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
+#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008
+#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002
+#define CONFIG_SYS_GAFR3_L_VAL 0x54000310
+#define CONFIG_SYS_GAFR3_U_VAL 0x00005401
#define CONFIG_SYS_PSSR_VAL 0x30
/*
* Memory settings
*/
-#define CONFIG_SYS_MSC0_VAL 0x000095f2
-#define CONFIG_SYS_MSC1_VAL 0x00007ff4
-#define CONFIG_SYS_MSC2_VAL 0x00000000
-#define CONFIG_SYS_MDCNFG_VAL 0x08000ac9
-#define CONFIG_SYS_MDREFR_VAL 0x2013e01e
-#define CONFIG_SYS_MDMRS_VAL 0x00320032
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
+#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2
+#define CONFIG_SYS_MSC1_VAL 0x9ee1f994
+#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1
+#define CONFIG_SYS_MDCNFG_VAL 0x090009c9
+#define CONFIG_SYS_MDREFR_VAL 0x2003a031
+#define CONFIG_SYS_MDMRS_VAL 0x00220022
+#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
#define CONFIG_SYS_SXCNFG_VAL 0x40044004
/*
* PCMCIA and CF Interfaces
*/
-#define CONFIG_SYS_MECR_VAL 0x00000001
-#define CONFIG_SYS_MCMEM0_VAL 0x00014307
+#define CONFIG_SYS_MECR_VAL 0x00000000
+#define CONFIG_SYS_MCMEM0_VAL 0x00028307
#define CONFIG_SYS_MCMEM1_VAL 0x00014307
-#define CONFIG_SYS_MCATT0_VAL 0x0001c787
+#define CONFIG_SYS_MCATT0_VAL 0x00038787
#define CONFIG_SYS_MCATT1_VAL 0x0001c787
-#define CONFIG_SYS_MCIO0_VAL 0x0001430f
+#define CONFIG_SYS_MCIO0_VAL 0x0002830f
#define CONFIG_SYS_MCIO1_VAL 0x0001430f
-/*
- * USB
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "tdex270"
-#define CONFIG_USB_STORAGE
-#endif
+#include "pxa-common.h"
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_H */