global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG

[platform/kernel/u-boot.git] / include / configs / colibri_imx7.h

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 2fffaa3..c568643 100644 (file)
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -13,25 +13,14 @@
 
 #include "mx7_common.h"
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (32 * SZ_1M)
-
 /* MMC Config*/
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
+#define CFG_SYS_FSL_ESDHC_ADDR 0
 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
-#define CONFIG_SYS_FSL_USDHC_NUM       1
+#define CFG_SYS_FSL_USDHC_NUM  1
 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
-#define CONFIG_SYS_FSL_USDHC_NUM       2
+#define CFG_SYS_FSL_USDHC_NUM  2
 #endif
 
-/* I2C configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED           100000
-
-#define CONFIG_IPADDR                  192.168.10.2
-#define CONFIG_NETMASK                 255.255.255.0
-#define CONFIG_SERVERIP                        192.168.10.1
-
 #if defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 #define UBOOT_UPDATE \
        "uboot_hwpart=1\0" \
@@ -90,20 +79,11 @@
 
 #define MEM_LAYOUT_ENV_SETTINGS \
        "bootm_size=0x10000000\0" \
-       "fdt_addr_r=0x82000000\0" \
-       "kernel_addr_r=0x81000000\0" \
-       "pxefile_addr_r=0x87100000\0" \
-       "ramdisk_addr_r=0x82100000\0" \
-       "scriptaddr=0x87000000\0"
-
-#define NFS_BOOTCMD \
-       "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
-       "nfsboot=run setup; " \
-               "setenv bootargs ${defargs} ${nfsargs} " \
-               "${setupargs} ${vidargs}; echo Booting from NFS...;" \
-               "dhcp ${kernel_addr_r} && " \
-               "tftp ${fdt_addr_r} ${soc}-colibri${variant}-${fdt_board}.dtb && " \
-               "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "fdt_addr_r=0x88200000\0" \
+       "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "pxefile_addr_r=0x88300000\0" \
+       "ramdisk_addr_r=0x88400000\0" \
+       "scriptaddr=0x88280000\0"
 
 #define UBI_BOOTCMD    \
        "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
@@ -117,10 +97,7 @@
                "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
-#define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \
-       "run distro_bootcmd;"
 #define MODULE_EXTRA_ENV_SETTINGS \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        UBI_BOOTCMD
 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 #define MODULE_EXTRA_ENV_SETTINGS \
@@ -142,14 +119,13 @@
 #endif
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        BOOTENV \
        MEM_LAYOUT_ENV_SETTINGS \
-       NFS_BOOTCMD \
        MODULE_EXTRA_ENV_SETTINGS \
        UBOOT_UPDATE \
        "boot_file=zImage\0" \
-       "bootubipart=ubi\0" \
+       "boot_script_dhcp=boot.scr\0" \
        "console=ttymxc0\0" \
        "defargs=\0" \
        "fdt_board=eval-v3\0" \
@@ -171,49 +147,27 @@
                "fatload ${interface} 0:1 ${loadaddr} " \
                "${board}/flash_blk.img && source ${loadaddr}\0" \
        "splashpos=m,m\0" \
-       "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
+       "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
        "updlevel=2\0"
 
 /* Miscellaneous configurable options */
 
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                  1000
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_SDRAM_BASE             PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR  IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE  IRAM_SIZE
 
 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
 /* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
+#define CFG_SYS_NAND_BASE              0x40000000
 #endif
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS           0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
-#define CONFIG_USBD_HS
-
-#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
-#define CONFIG_VIDEO_MXS
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
+#define CFG_MXC_USB_PORTSC             (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS              0
 
 #endif