Merge branch 'master' of git://git.denx.de/u-boot-usb

[platform/kernel/u-boot.git] / include / configs / colibri_imx7.h

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 7e25fd7..b038979 100644 (file)
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Toradex AG
  *
@@ -5,8 +6,6 @@
  *
  * based on mx7dsabresd.h:
  * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __COLIBRI_IMX7_CONFIG_H
@@ -17,11 +16,6 @@
 /*#define CONFIG_DBG_MONITOR*/
 #define PHYS_SDRAM_SIZE                        SZ_512M
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE  /* Calls show_board_info() */
-
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (32 * SZ_1M)
 
@@ -32,8 +26,6 @@
 #define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          0
 
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 #define CONFIG_IP_DEFRAG
 #define CONFIG_TFTP_BLOCKSIZE          16352
 #define CONFIG_TFTP_TSIZE
@@ -107,7 +99,7 @@
        "m4boot=;\0" \
        "ip_dyn=yes\0" \
        "kernel_file=zImage\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
                "${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -126,7 +118,6 @@
        "updlevel=2\0"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
 
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x0c000000)
@@ -148,7 +139,6 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* environment organization */
-#define CONFIG_ENV_IS_IN_NAND
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV         0   /* USDHC1 */
@@ -161,38 +151,18 @@
 #define CONFIG_ENV_SIZE                        CONFIG_ENV_SECT_SIZE
 #endif
 
-#define CONFIG_NAND_MXS
-#define CONFIG_CMD_NAND_TRIMFFS
-
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
-#define CONFIG_CMD_NAND_TORTURE
-
-/* UBI stuff */
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS       /* increases size by almost 60 KB */
 
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS    /* Enable 'mtdparts' command line support */
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
-#define MTDIDS_DEFAULT         "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT       "mtdparts=gpmi-nand:"           \
-                               "512k(mx7-bcb),"                \
-                               "1536k(u-boot1)ro,"             \
-                               "1536k(u-boot2)ro,"             \
-                               "512k(u-boot-env),"             \
-                               "-(ubi)"
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
 
 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
@@ -205,8 +175,6 @@
 
 #define CONFIG_USBD_HS
 
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-
 /* USB Device Firmware Update support */
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT       300
@@ -216,7 +184,6 @@
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO