/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
-/* Network */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0
-
-#define CONFIG_TFTP_TSIZE
-
-/* ENET1 */
-#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
-
/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
#define CONFIG_SYS_FSL_USDHC_NUM 2
#endif
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
/* I2C configs */
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
+#if defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
+#define UBOOT_UPDATE \
+ "uboot_hwpart=1\0" \
+ "uboot_blk=2\0" \
+ "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+ "setexpr blkcnt ${blkcnt} / 0x200\0" \
+ "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+ "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0"
+#elif defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
+#define UBOOT_UPDATE \
+ "update_uboot=nand erase.part u-boot1 && " \
+ "nand write ${loadaddr} u-boot1 ${filesize} && " \
+ "nand erase.part u-boot2 && " \
+ "nand write ${loadaddr} u-boot2 ${filesize}\0"
+#endif
+
+#ifndef PARTS_DEFAULT
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+ /* Android partitions */ \
+ "partitions_android=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=boot,start=1M,size=32M,uuid=${uuid_gpt_boot};" \
+ "name=environment,size=4M,uuid=${uuid_gpt_environment};" \
+ "name=recovery,size=16M,uuid=${uuid_gpt_recovery};" \
+ "name=system,size=1536M,uuid=${uuid_gpt_system};" \
+ "name=cache,size=512M,uuid=${uuid_gpt_cache};" \
+ "name=device,size=8M,uuid=${uuid_gpt_device};" \
+ "name=misc,size=4M,uuid=${uuid_gpt_misc};" \
+ "name=datafooter,size=2M,uuid=${uuid_gpt_datafooter};" \
+ "name=metadata,size=2M,uuid=${uuid_gpt_metadata};" \
+ "name=persistdata,size=2M,uuid=${uuid_gpt_persistdata};" \
+ "name=userdata,size=128M,uuid=${uuid_gpt_userdata};" \
+ "name=fbmisc,size=-,uuid=${uuid_gpt_fbmisc}\0"
+#endif /* PARTS_DEFAULT */
+
+#define EMMC_ANDROID_BOOTCMD \
+ "android_args=androidboot.storage_type=emmc\0" \
+ PARTS_DEFAULT \
+ "android_fdt_addr=0x83700000\0" \
+ "android_mmc_dev=0\0" \
+ "m4binary=rpmsg_imu_freertos.elf\0" \
+ "androidboot=ext4load mmc 0:a ${loadaddr} media/0/${m4binary}; "\
+ "bootaux ${loadaddr}; " \
+ "setenv loadaddr 0x88000000; " \
+ "setenv bootm_boot_mode sec;" \
+ "setenv bootargs androidboot.serialno=${serial#} " \
+ "$android_args; " \
+ "part start mmc ${android_mmc_dev} boot boot_start; " \
+ "part size mmc ${android_mmc_dev} boot boot_size; " \
+ "mmc read ${loadaddr} ${boot_start} ${boot_size}; " \
+ "part start mmc ${android_mmc_dev} environment env_start; " \
+ "part size mmc ${android_mmc_dev} environment env_size; " \
+ "mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \
+ "bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 "
+
#define EMMC_BOOTCMD \
"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
"rootfstype=ext4 rootwait\0" \
"emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
"emmcrootpart=2\0"
-
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82000000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
- "ramdisk_addr_r=0x82100000\0"
-
-#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
-#define SD_BOOTDEV 0
-#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define SD_BOOTDEV 1
-#endif
-
-#define SD_BOOTCMD \
- "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
- "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
- "setenv bootargs ${defargs} ${sdargs} " \
- "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
- "run m4boot && " \
- "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
- "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
- "${soc}-colibri-${fdt_board}.dtb && " \
- "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "sdbootpart=1\0" \
- "sddev=" __stringify(SD_BOOTDEV) "\0" \
- "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
- "sdrootpart=2\0"
-
+ "ramdisk_addr_r=0x82100000\0" \
+ "scriptaddr=0x82500000\0"
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
UBI_BOOTCMD
#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \
+#define CONFIG_BOOTCOMMAND \
"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
#define MODULE_EXTRA_ENV_SETTINGS \
"variant=-emmc\0" \
- EMMC_BOOTCMD
+ EMMC_BOOTCMD \
+ EMMC_ANDROID_BOOTCMD
#endif
#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
- SD_BOOTCMD \
MODULE_EXTRA_ENV_SETTINGS \
+ UBOOT_UPDATE \
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=\0" \
#if defined(CONFIG_ENV_IS_IN_MMC)
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
- CONFIG_TDX_CFG_BLOCK_OFFSET)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 1
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#endif
#ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
projects / platform / kernel / u-boot.git / blobdiff