global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR

[platform/kernel/u-boot.git] / include / configs / colibri_imx7.h

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 7c00f78..4d9de07 100644 (file)
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -24,10 +24,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #endif
 
-/* I2C configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED           100000
-
 #define CONFIG_IPADDR                  192.168.10.2
 #define CONFIG_NETMASK                 255.255.255.0
 #define CONFIG_SERVERIP                        192.168.10.1
@@ -88,29 +84,13 @@
                "mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \
                "bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 "
 
-#define EMMC_BOOTCMD \
-       "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
-               "rootfstype=ext4 rootwait\0" \
-       "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
-               "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
-               "${vidargs}; echo Booting from internal eMMC chip...; " \
-               "run m4boot && " \
-               "load mmc ${emmcdev}:${emmcbootpart} ${fdt_addr_r} " \
-               "${soc}-colibri-emmc-${fdt_board}.dtb && " \
-               "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
-               "${boot_file} && run fdt_fixup && " \
-               "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-       "emmcbootpart=1\0" \
-       "emmcdev=0\0" \
-       "emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
-       "emmcrootpart=2\0"
-
 #define MEM_LAYOUT_ENV_SETTINGS \
        "bootm_size=0x10000000\0" \
        "fdt_addr_r=0x82000000\0" \
        "kernel_addr_r=0x81000000\0" \
+       "pxefile_addr_r=0x87100000\0" \
        "ramdisk_addr_r=0x82100000\0" \
-       "scriptaddr=0x82500000\0"
+       "scriptaddr=0x87000000\0"
 
 #define NFS_BOOTCMD \
        "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
@@ -126,7 +106,7 @@
                "ubi.fm_autoconvert=1\0" \
        "ubiboot=run setup; " \
                "setenv bootargs ${defargs} ${ubiargs} " \
-               "${setupargs} ${vidargs}; echo Booting from NAND...; " \
+               "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
                "ubi part ubi && run m4boot && " \
                "ubi read ${kernel_addr_r} kernel && " \
                "ubi read ${fdt_addr_r} dtb && " \
@@ -134,16 +114,13 @@
 
 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
 #define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \
-       "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
+       "run distro_bootcmd;"
 #define MODULE_EXTRA_ENV_SETTINGS \
        "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        UBI_BOOTCMD
 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define CONFIG_BOOTCOMMAND \
-       "setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
 #define MODULE_EXTRA_ENV_SETTINGS \
        "variant=-emmc\0" \
-       EMMC_BOOTCMD \
        EMMC_ANDROID_BOOTCMD
 #endif
 
@@ -154,8 +131,8 @@
        func(DHCP, dhcp, na)
 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 #define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
+       func(MMC, mmc, 0) \
        func(USB, usb, 0) \
        func(DHCP, dhcp, na)
 #endif
@@ -168,6 +145,7 @@
        MODULE_EXTRA_ENV_SETTINGS \
        UBOOT_UPDATE \
        "boot_file=zImage\0" \
+       "bootubipart=ubi\0" \
        "console=ttymxc0\0" \
        "defargs=\0" \
        "fdt_board=eval-v3\0" \
@@ -189,15 +167,12 @@
                "fatload ${interface} 0:1 ${loadaddr} " \
                "${board}/flash_blk.img && source ${loadaddr}\0" \
        "splashpos=m,m\0" \
+       "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
        "updlevel=2\0"
 
 /* Miscellaneous configurable options */
 
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x0c000000)
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                  1000
 
 /* Physical Memory Map */
@@ -212,14 +187,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* environment organization */
-
-#if defined(CONFIG_ENV_IS_IN_MMC)
-/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#define CONFIG_SYS_MMC_ENV_PART                1
-#endif
-
 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -236,21 +203,11 @@
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
-#define CONFIG_IMX_THERMAL
-
 #define CONFIG_USBD_HS
 
-/* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_16M
-#define DFU_DEFAULT_POLL_TIMEOUT       300
-
 #if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO
 #endif