#ifndef __CONFIG_H
#define __CONFIG_H
-#include "mx6_common.h"
+#include <linux/stringify.h>
-#undef CONFIG_DISPLAY_BOARDINFO
+#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>
#include "imx6_spl.h"
#endif
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SERIAL_TAG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
-
-#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
-/* I2C Configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_MXC_I2C3_SPEED 400000
-
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
-/* Network */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 1
-#define CONFIG_TFTP_TSIZE
-
/* USB Configs */
/* Host */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
/* Framebuffer and LCD */
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
/* Command definition */
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FLASH
#undef CONFIG_IPADDR
#define CONFIG_IPADDR 192.168.10.2
#undef CONFIG_SERVERIP
#define CONFIG_SERVERIP 192.168.10.1
-#define CONFIG_LOADADDR 0x12000000
-
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
+ func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#define BOOTENV
#endif /* CONFIG_SPL_BUILD */
-#define DFU_ALT_EMMC_INFO \
- "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
- "boot part 0 1;" \
- "rootfs part 0 2;" \
- "zImage fat 0 1;" \
- "imx6dl-colibri-eval-v3.dtb fat 0 1;" \
- "imx6dl-colibri-cam-eval-v3.dtb fat 0 1"
-
#define UBOOT_UPDATE \
"uboot_hwpart=1\0" \
"uboot_blk=8a\0" \
"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
-#define EMMC_BOOTCMD \
- "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\
- "rw,noatime rootfstype=ext4 " \
- "rootwait\0" \
- "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
- "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
- "${vidargs}; echo Booting from internal eMMC chip...; " \
- "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
- "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} ${dtbparam}\0" \
- "emmcbootpart=1\0" \
- "emmcdev=0\0" \
- "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
- "${fdt_addr_r} ${fdt_file} && " \
- "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
- "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
- "emmcrootpart=2\0"
-
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x12100000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
"kernel_addr_r=0x11000000\0" \
"pxefile_addr_r=0x17100000\0" \
"ramdisk_addr_r=0x12200000\0" \
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
- "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
+ "bootcmd=run distro_bootcmd; " \
"usb start ; " \
- "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "setenv stdout serial,vidconsole; " \
+ "setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
- "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
- EMMC_BOOTCMD \
"fdt_file=" FDT_FILE "\0" \
+ "fdtfile=" FDT_FILE "\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"splashpos=m,m\0" \
- "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
- "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
- "video=mxcfb1:off fbmem=8M\0 "
+ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "vidargs=fbmem=8M\0"
/* Miscellaneous configurable options */
#undef CONFIG_SYS_CBSIZE
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS 48
-#define CONFIG_SYS_MEMTEST_START 0x10000000
-#define CONFIG_SYS_MEMTEST_END 0x10010000
-#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* environment organization */
-
-#if defined(CONFIG_ENV_IS_IN_MMC)
-/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_SYS_MMC_ENV_PART 1
-#endif
-
-#define CONFIG_CMD_TIME
-
#endif /* __CONFIG_H */