Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig

[platform/kernel/u-boot.git] / include / configs / colibri_imx6.h

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index c014d6b..3c220e0 100644 (file)
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -12,8 +12,6 @@
 
 #include "mx6_common.h"
 
-#undef CONFIG_DISPLAY_BOARDINFO
-
 #include <asm/arch/imx-regs.h>
 #include <asm/mach-imx/gpio.h>
 
@@ -21,42 +19,20 @@
 #include "imx6_spl.h"
 #endif
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SERIAL_TAG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (32 * 1024 * 1024)
-
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_MXC_I2C3_SPEED      400000
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 /* USB Configs */
 /* Host */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT                2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 /* Client */
 #define CONFIG_USBD_HS
 
 /* Framebuffer and LCD */
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
@@ -68,11 +44,7 @@
 #undef CONFIG_SERVERIP
 #define CONFIG_SERVERIP                        192.168.10.1
 
-#define CONFIG_LOADADDR                        0x12000000
-
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
        func(MMC, mmc, 0) \
        func(USB, usb, 0) \
@@ -80,9 +52,6 @@
 #include <config_distro_bootcmd.h>
 #undef BOOTENV_RUN_NET_USB_START
 #define BOOTENV_RUN_NET_USB_START ""
-#else /* CONFIG_SPL_BUILD */
-#define BOOTENV
-#endif /* CONFIG_SPL_BUILD */
 
 #define UBOOT_UPDATE \
        "uboot_hwpart=1\0" \
@@ -103,31 +72,15 @@
        "ramdisk_addr_r=0x12200000\0" \
        "scriptaddr=0x17000000\0"
 
-#define NFS_BOOTCMD \
-       "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
-       "nfsboot=run setup; " \
-               "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
-               "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
-               "run nfsdtbload; dhcp ${kernel_addr_r} " \
-               "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
-       "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
-               "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
-
-#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
        BOOTENV \
-       "bootcmd=run distro_bootcmd; " \
-               "usb start ; " \
-               "setenv stdout serial,vidconsole; " \
-               "setenv stdin serial,usbkbd\0" \
        "boot_file=zImage\0" \
+       "boot_script_dhcp=boot.scr\0" \
        "console=ttymxc0\0" \
        "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
-       "fdt_file=" FDT_FILE "\0" \
-       "fdtfile=" FDT_FILE "\0" \
+       "fdt_board=eval-v3\0" \
        "fdt_fixup=;\0" \
        MEM_LAYOUT_ENV_SETTINGS \
-       NFS_BOOTCMD \
        UBOOT_UPDATE \
        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
@@ -143,17 +96,10 @@
                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
                "source ${loadaddr}\0" \
        "splashpos=m,m\0" \
-       "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
-       "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
-               "video=mxcfb1:off fbmem=8M\0 "
+       "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "vidargs=fbmem=8M\0"
 
 /* Miscellaneous configurable options */
-#undef CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_CBSIZE              1024
-#undef CONFIG_SYS_MAXARGS
-#define CONFIG_SYS_MAXARGS             48
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -162,9 +108,4 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 #endif /* __CONFIG_H */