video: Drop CONFIG_VIDEO_BMP_LOGO

[platform/kernel/u-boot.git] / include / configs / colibri_imx6.h

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 79003e3..0d1a1bc 100644 (file)
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -12,8 +12,6 @@
 
 #include "mx6_common.h"
 
-#undef CONFIG_DISPLAY_BOARDINFO
-
 #include <asm/arch/imx-regs.h>
 #include <asm/mach-imx/gpio.h>
 
@@ -21,25 +19,8 @@
 #include "imx6_spl.h"
 #endif
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SERIAL_TAG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (32 * 1024 * 1024)
-
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_MXC_I2C3_SPEED      400000
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       2
@@ -54,13 +35,6 @@
 #define CONFIG_USBD_HS
 
 /* Framebuffer and LCD */
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
@@ -72,11 +46,8 @@
 #undef CONFIG_SERVERIP
 #define CONFIG_SERVERIP                        192.168.10.1
 
-#define CONFIG_LOADADDR                        0x12000000
-
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
        func(MMC, mmc, 0) \
        func(USB, usb, 0) \
@@ -120,14 +91,11 @@
 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
        BOOTENV \
-       "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
-               "usb start ; " \
-               "setenv stdout serial,vidconsole; " \
-               "setenv stdin serial,usbkbd\0" \
        "boot_file=zImage\0" \
        "console=ttymxc0\0" \
        "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
        "fdt_file=" FDT_FILE "\0" \
+       "fdtfile=" FDT_FILE "\0" \
        "fdt_fixup=;\0" \
        MEM_LAYOUT_ENV_SETTINGS \
        NFS_BOOTCMD \
@@ -146,9 +114,8 @@
                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
                "source ${loadaddr}\0" \
        "splashpos=m,m\0" \
-       "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
-       "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
-               "video=mxcfb1:off fbmem=8M\0 "
+       "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "vidargs=fbmem=8M\0"
 
 /* Miscellaneous configurable options */
 #undef CONFIG_SYS_CBSIZE
@@ -156,8 +123,6 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS             48
 
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
@@ -170,12 +135,4 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* environment organization */
-
-#if defined(CONFIG_ENV_IS_IN_MMC)
-/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#define CONFIG_SYS_MMC_ENV_PART                1
-#endif
-
 #endif /* __CONFIG_H */