MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig

[platform/kernel/u-boot.git] / include / configs / colibri-imx6ull.h

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 53bfab4..321edab 100644 (file)
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -16,7 +16,6 @@
 #define PHYS_SDRAM_SIZE                        SZ_1G
 
 /* ENET1 */
-#define IMX_FEC_BASE                   ENET2_BASE_ADDR
 
 /* MMC Config */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
@@ -44,20 +43,11 @@
 
 #define MEM_LAYOUT_ENV_SETTINGS \
        "bootm_size=0x10000000\0" \
-       "fdt_addr_r=0x82100000\0" \
-       "kernel_addr_r=0x81000000\0" \
-       "pxefile_addr_r=0x87100000\0" \
-       "ramdisk_addr_r=0x82200000\0" \
-       "scriptaddr=0x87000000\0"
-
-#define NFS_BOOTCMD \
-       "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
-       "nfsboot=run setup; " \
-               "setenv bootargs ${defargs} ${nfsargs} " \
-               "${setupargs} ${vidargs}; echo Booting from NFS...;" \
-               "dhcp ${kernel_addr_r} && " \
-               "tftp ${fdt_addr_r} ${fdtfile} && " \
-               "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "fdt_addr_r=0x88200000\0" \
+       "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "pxefile_addr_r=0x88300000\0" \
+       "ramdisk_addr_r=0x88400000\0" \
+       "scriptaddr=0x88280000\0"
 
 #define UBI_BOOTCMD \
        "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
@@ -75,7 +65,6 @@
 #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
 #define MODULE_EXTRA_ENV_SETTINGS \
        "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        UBI_BOOTCMD
 #else
 #define        MODULE_EXTRA_ENV_SETTINGS ""
@@ -98,10 +87,9 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
        BOOTENV \
        MEM_LAYOUT_ENV_SETTINGS \
-       NFS_BOOTCMD \
        UBI_BOOTCMD \
        UBOOT_UPDATE \
-       "bootubipart=ubi\0" \
+       "boot_script_dhcp=boot.scr\0" \
        "console=ttymxc0\0" \
        "defargs=user_debug=30\0" \
        "fdt_board=eval-v3\0" \
@@ -123,9 +111,7 @@
                "${board}/flash_blk.img && source ${loadaddr}\0" \
        "splashpos=m,m\0" \
        "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-       "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
-       "vidargs=video=mxsfb:640x480M-16@60"
-
+       "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0"
 
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -134,16 +120,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* environment organization */
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_RANGE       (4 * CONFIG_ENV_SIZE)
-#endif
-
 #ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -152,18 +128,16 @@
 #endif
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
 #define CONFIG_USBD_HS
 
 /* USB Device Firmware Update support */
 #define DFU_DEFAULT_POLL_TIMEOUT       300
 
-#if defined(CONFIG_DM_VIDEO)
+#if defined(CONFIG_VIDEO)
 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 #endif