imx: wandboard: convert FEC support to DM_ETH

[platform/kernel/u-boot.git] / include / configs / colibri-imx6ull.h

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 7661000..0a4f30f 100644 (file)
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2019 Toradex AG
  *
  * Configuration settings for the Colibri iMX6ULL module.
  *
@@ -13,32 +13,21 @@
 #include "mx6_common.h"
 #define CONFIG_IOMUX_LPSR
 
-/* #define CONFIG_DBG_MONITOR*/
 #define PHYS_SDRAM_SIZE                        SZ_512M
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (32 * SZ_1M)
 
 /* Network */
-#define CONFIG_MII
-#define CONFIG_FEC_XCV_TYPE             RMII
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_MXC_PHYADDR         0
-
-#define CONFIG_IP_DEFRAG
-#define CONFIG_TFTP_BLOCKSIZE          16352
 #define CONFIG_TFTP_TSIZE
 
 /* ENET1 */
 #define IMX_FEC_BASE                   ENET2_BASE_ADDR
 
-/* MMC Config*/
+/* MMC Config */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       1
 
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
 /* I2C configs */
 #define CONFIG_SYS_I2C_SPEED           100000
 
@@ -50,12 +39,12 @@
 
 #define MEM_LAYOUT_ENV_SETTINGS \
        "bootm_size=0x10000000\0" \
-       "fdt_addr_r=0x82000000\0" \
+       "fdt_addr_r=0x82100000\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
        "kernel_addr_r=0x81000000\0" \
        "pxefile_addr_r=0x87100000\0" \
-       "ramdisk_addr_r=0x82100000\0" \
+       "ramdisk_addr_r=0x82200000\0" \
        "scriptaddr=0x87000000\0"
 
 #define NFS_BOOTCMD \
@@ -68,12 +57,17 @@
                "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define SD_BOOTCMD \
-       "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
-       "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
+       "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
+       "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+       "setenv bootargs ${defargs} ${sdargs} " \
        "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-       "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
-       "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \
+       "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
+       "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " FDT_FILE " && " \
        "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "sdbootpart=1\0" \
+       "sddev=0\0" \
+       "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+       "sdrootpart=2\0"
 
 #define UBI_BOOTCMD \
        "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
@@ -110,7 +104,7 @@
        "fdt_fixup=;\0" \
        "ip_dyn=yes\0" \
        "kernel_file=zImage\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
                "${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -126,7 +120,7 @@
                "${board}/flash_blk.img && source ${loadaddr}\0" \
        "splashpos=m,m\0" \
        "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
-       "vidargs=video=mxsfb:640x480-16@60"
+       "vidargs=video=mxsfb:640x480M-16@60"
 
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x08000000)
@@ -134,7 +128,6 @@
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -157,18 +150,6 @@
 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
 #define CONFIG_SYS_NAND_BASE           -1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-
-/* Dynamic MTD partition support */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
-#define MTDIDS_DEFAULT         "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT       "mtdparts=gpmi-nand:"           \
-                               "512k(mx6ull-bcb),"             \
-                               "1536k(u-boot1)ro,"             \
-                               "1536k(u-boot2)ro,"             \
-                               "512k(u-boot-env),"             \
-                               "-(ubi)"
 
 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
@@ -185,7 +166,7 @@
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT       300
 
-#ifdef CONFIG_VIDEO
+#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
 #define CONFIG_VIDEO_MXS
 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 #define CONFIG_VIDEO_LOGO
@@ -196,4 +177,4 @@
 #define CONFIG_VIDEO_BMP_LOGO
 #endif
 
-#endif
+#endif /* __COLIBRI_IMX6ULL_CONFIG_H */