#define PHYS_SDRAM_SIZE SZ_1G
/* ENET1 */
-#define IMX_FEC_BASE ENET2_BASE_ADDR
/* MMC Config */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
"ramdisk_addr_r=0x82200000\0" \
"scriptaddr=0x87000000\0"
-#define NFS_BOOTCMD \
- "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
- "nfsboot=run setup; " \
- "setenv bootargs ${defargs} ${nfsargs} " \
- "${setupargs} ${vidargs}; echo Booting from NFS...;" \
- "dhcp ${kernel_addr_r} && " \
- "tftp ${fdt_addr_r} ${fdtfile} && " \
- "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
#define MODULE_EXTRA_ENV_SETTINGS \
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
UBI_BOOTCMD
#else
#define MODULE_EXTRA_ENV_SETTINGS ""
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
- NFS_BOOTCMD \
UBI_BOOTCMD \
UBOOT_UPDATE \
"boot_script_dhcp=boot.scr\0" \
- "bootubipart=ubi\0" \
"console=ttymxc0\0" \
"defargs=user_debug=30\0" \
"fdt_board=eval-v3\0" \
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* environment organization */
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SIZE)
-#endif
-
#ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#endif
/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USBD_HS