configs: Remove a number of unreferenced CONFIG options.

[platform/kernel/u-boot.git] / include / configs / cobra5272.h

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index efc6b5b..ba0662f 100644 (file)
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -32,9 +32,6 @@
 #define CONFIG_SYS_CLK                 66000000
 #define CONFIG_SYS_SDRAM_SIZE          16              /* SDRAM size in MB */
 
-/* Enable Dma Timer */
-#define CONFIG_MCFTMR
-
 /* ---
  * Define baudrate for UART1 (console output, tftp, ...)
  * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud
@@ -43,7 +40,6 @@
  * ---
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
 /* ---
@@ -55,7 +51,6 @@
  */
 
 #if 0
-#define CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000  /* timeout in milliseconds */
 #endif
 
@@ -91,27 +86,6 @@
        env/embedded.o(.text);
 
 /*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#ifdef CONFIG_MCFFEC
-#      define CONFIG_MII_INIT          1
-#      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#      ifndef CONFIG_SYS_DISCOVER_PHY
-#              define FECDUPLEX        FULL
-#              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
-#      endif                   /* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-/*
  *-----------------------------------------------------------------------------
  * Define user parameters that have to be customized most likely
  *-----------------------------------------------------------------------------
@@ -125,7 +99,6 @@ u-boot: 'set' command */
 
 #if 0
 
-#define CONFIG_BOOTCOMMAND     "bootm 0xffe80000"      /*Autoboto command, please
 enter a valid image address in flash */
 
 /* User network settings */
@@ -170,21 +143,11 @@ enter a valid image address in flash */
 #define CONFIG_SYS_SCR                 0x0003
 #define CONFIG_SYS_SPR                 0xffff
 
-/* ---
- * Ethernet settings
- * ---
- */
-
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_ENET_BD_BASE        0x780000
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in internal SRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x1000  /* Size of used area in internal SRAM   */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -207,14 +170,7 @@ enter a valid image address in flash */
 
 #define CONFIG_SYS_FLASH_BASE          0xffe00000
 
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE        0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN         0x20000
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -224,13 +180,6 @@ enter a valid image address in flash */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      11      /* max number of sectors on one chip    */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    1000    /* flash timeout */
-
-/*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
@@ -248,36 +197,6 @@ enter a valid image address in flash */
                                         CF_CACR_EUSP)
 
 /*-----------------------------------------------------------------------
- * Memory bank definitions
- *
- * Please refer also to Motorola Coldfire user manual - Chapter XXX
- * <http://e-www.motorola.com/files/dsp/doc/ref_manual/MCF5272UM.pdf>
- */
-#define CONFIG_SYS_BR0_PRELIM          0xFFE00201
-#define CONFIG_SYS_OR0_PRELIM          0xFFE00014
-
-#define CONFIG_SYS_BR1_PRELIM          0
-#define CONFIG_SYS_OR1_PRELIM          0
-
-#define CONFIG_SYS_BR2_PRELIM          0
-#define CONFIG_SYS_OR2_PRELIM          0
-
-#define CONFIG_SYS_BR3_PRELIM          0
-#define CONFIG_SYS_OR3_PRELIM          0
-
-#define CONFIG_SYS_BR4_PRELIM          0
-#define CONFIG_SYS_OR4_PRELIM          0
-
-#define CONFIG_SYS_BR5_PRELIM          0
-#define CONFIG_SYS_OR5_PRELIM          0
-
-#define CONFIG_SYS_BR6_PRELIM          0
-#define CONFIG_SYS_OR6_PRELIM          0
-
-#define CONFIG_SYS_BR7_PRELIM          0x00000701
-#define CONFIG_SYS_OR7_PRELIM          0xFF00007C
-
-/*-----------------------------------------------------------------------
  * LED config
  */
 #define        LED_STAT_0      0xffff /*all LEDs off*/