configs: Remove a number of unreferenced CONFIG options.

[platform/kernel/u-boot.git] / include / configs / cobra5272.h

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 9d3ee7f..ba0662f 100644 (file)
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -32,9 +32,6 @@
 #define CONFIG_SYS_CLK                 66000000
 #define CONFIG_SYS_SDRAM_SIZE          16              /* SDRAM size in MB */
 
-/* Enable Dma Timer */
-#define CONFIG_MCFTMR
-
 /* ---
  * Define baudrate for UART1 (console output, tftp, ...)
  * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud
@@ -88,22 +85,6 @@
        . = DEFINED(env_offset) ? env_offset : .; \
        env/embedded.o(.text);
 
-#ifdef CONFIG_MCFFEC
-#      define CONFIG_MII_INIT          1
-#      define CONFIG_SYS_DISCOVER_PHY
-#      define CONFIG_SYS_RX_ETH_BUFFER 8
-#      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#      ifndef CONFIG_SYS_DISCOVER_PHY
-#              define FECDUPLEX        FULL
-#              define FECSPEED         _100BASET
-#      else
-#              ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#                      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#              endif
-#      endif                   /* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
 /*
  *-----------------------------------------------------------------------------
  * Define user parameters that have to be customized most likely
@@ -162,21 +143,11 @@ enter a valid image address in flash */
 #define CONFIG_SYS_SCR                 0x0003
 #define CONFIG_SYS_SPR                 0xffff
 
-/* ---
- * Ethernet settings
- * ---
- */
-
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_ENET_BD_BASE        0x780000
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in internal SRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x1000  /* Size of used area in internal SRAM   */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -199,14 +170,7 @@ enter a valid image address in flash */
 
 #define CONFIG_SYS_FLASH_BASE          0xffe00000
 
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE        0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN         0x20000
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -216,12 +180,6 @@ enter a valid image address in flash */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_SECT      11      /* max number of sectors on one chip    */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    1000    /* flash timeout */
-
-/*-----------------------------------------------------------------------
  * Cache Configuration
  */