Finish converting CONFIG_WATCHDOG, HW_WATCHDOG and WDT to Kconfig

[platform/kernel/u-boot.git] / include / configs / cobra5272.h

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index b6c3cd8..3e19e99 100644 (file)
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -32,12 +32,6 @@
 #define CONFIG_SYS_CLK                 66000000
 #define CONFIG_SYS_SDRAM_SIZE          16              /* SDRAM size in MB */
 
-/* ---
- * Enable use of Ethernet
- * ---
- */
-#define CONFIG_MCFFEC
-
 /* Enable Dma Timer */
 #define CONFIG_MCFTMR
 
@@ -49,7 +43,6 @@
  * ---
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
 /* ---
@@ -61,7 +54,6 @@
  */
 
 #if 0
-#define CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000  /* timeout in milliseconds */
 #endif
 
@@ -101,19 +93,11 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #ifdef CONFIG_MCFFEC
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
 #      define CONFIG_SYS_RX_ETH_BUFFER 8
 #      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#      define CONFIG_SYS_FEC0_PINMUX           0
-#      define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
-#      define MCFFEC_TOUT_LOOP         50000
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #      ifndef CONFIG_SYS_DISCOVER_PHY
 #              define FECDUPLEX        FULL
@@ -139,7 +123,6 @@ u-boot: 'set' command */
 
 #if 0
 
-#define CONFIG_BOOTCOMMAND     "bootm 0xffe80000"      /*Autoboto command, please
 enter a valid image address in flash */
 
 /* User network settings */
@@ -149,9 +132,6 @@ enter a valid image address in flash */
 
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR           0x20000         /*Defines default RAM address
-from which user programs will be started */
-
 /*---*/
 
 /*
@@ -165,9 +145,6 @@ from which user programs will be started */
  * ---
  */
 
-#define CONFIG_SYS_MEMTEST_START       0x400
-#define CONFIG_SYS_MEMTEST_END         0x380000
-
 /* ---
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -234,7 +211,6 @@ from which user programs will be started */
 #endif
 
 #define CONFIG_SYS_MONITOR_LEN         0x20000
-#define CONFIG_SYS_MALLOC_LEN          (256 << 10)
 #define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
 
 /*
@@ -254,7 +230,6 @@ from which user programs will be started */
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)
@@ -270,36 +245,6 @@ from which user programs will be started */
                                         CF_CACR_EUSP)
 
 /*-----------------------------------------------------------------------
- * Memory bank definitions
- *
- * Please refer also to Motorola Coldfire user manual - Chapter XXX
- * <http://e-www.motorola.com/files/dsp/doc/ref_manual/MCF5272UM.pdf>
- */
-#define CONFIG_SYS_BR0_PRELIM          0xFFE00201
-#define CONFIG_SYS_OR0_PRELIM          0xFFE00014
-
-#define CONFIG_SYS_BR1_PRELIM          0
-#define CONFIG_SYS_OR1_PRELIM          0
-
-#define CONFIG_SYS_BR2_PRELIM          0
-#define CONFIG_SYS_OR2_PRELIM          0
-
-#define CONFIG_SYS_BR3_PRELIM          0
-#define CONFIG_SYS_OR3_PRELIM          0
-
-#define CONFIG_SYS_BR4_PRELIM          0
-#define CONFIG_SYS_OR4_PRELIM          0
-
-#define CONFIG_SYS_BR5_PRELIM          0
-#define CONFIG_SYS_OR5_PRELIM          0
-
-#define CONFIG_SYS_BR6_PRELIM          0
-#define CONFIG_SYS_OR6_PRELIM          0
-
-#define CONFIG_SYS_BR7_PRELIM          0x00000701
-#define CONFIG_SYS_OR7_PRELIM          0xFF00007C
-
-/*-----------------------------------------------------------------------
  * LED config
  */
 #define        LED_STAT_0      0xffff /*all LEDs off*/