#ifndef __CONFIG_H
#define __CONFIG_H
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL
-
/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 207360000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */
-#define AT91C_MASTER_CLOCK 69120000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
+#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
+#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
+#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
+#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define USE_920T_MMU 1
+
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-#ifdef CONFIG_INIT_CRITICAL
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define CFG_USE_MAIN_OSCILLATOR 1
/* flash */
#define MC_PUIA_VAL 0x00000000
#define MC_ASR_VAL 0x00000000
#define MC_AASR_VAL 0x00000000
#define EBI_CFGR_VAL 0x00000000
-#define SMC2_CSR_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
/* clocks */
-#define PLLAR_VAL 0x202CBE04 /* 207.360 MHz for PCK */
+#define PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */
#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_INIT_CRITICAL */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/*
* Size of malloc() pool
#define CONFIG_BAUDRATE 9600
-#define CFG_AT91C_BRGR_DIVISOR 450 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */
-
/*
* Hardware drivers
*/
#define CFG_I2C_EEPROM_ADDR 0x50
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_I2C_EEPROM_ADDR_OVERFLOW
+#else
+#define CONFIG_TIMESTAMP
#endif
/* still about 20 kB free with this defined */
#define CFG_LONGHELP
-#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTDELAY 1
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP ) & \
- ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
-#else
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP ) & \
- ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
-#define CONFIG_TIMESTAMP
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+
+#if defined(CONFIG_HARD_I2C)
+ #define CONFIG_CMD_DATE
+ #define CONFIG_CMD_EEPROM
+ #define CONFIG_CMD_I2C
#endif
-#define CFG_LONGHELP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP
#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
+#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
-#define CFG_MEMTEST_START PHYS_SDRAM
-#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
#define CONFIG_DRIVER_ETHER
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_AT91C_USE_RMII
-#define CONFIG_HAS_DATAFLASH 1
#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
#define CFG_MAX_DATAFLASH_BANKS 2
#define CFG_MAX_DATAFLASH_PAGES 16384
#define CFG_FLASH_ERASE_TOUT (11 * CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT ( 2 * CFG_HZ) /* Timeout for Flash Write */
-#define CFG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x20000 /* after u-boot.bin */
#define CFG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
#define CFG_ENV_SIZE (16 << 10) /* Use only 16 kB */
#define CFG_MAXARGS 32 /* max number of command args */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#ifndef __ASSEMBLY__
-/*-----------------------------------------------------------------------
- * Board specific extension for bd_info
- *
- * This structure is embedded in the global bd_info (bd_t) structure
- * and can be used by the board specific code (eg board/...)
- */
-
-struct bd_info_ext {
- /* helper variable for board environment handling
- *
- * env_crc_valid == 0 => uninitialised
- * env_crc_valid > 0 => environment crc in flash is valid
- * env_crc_valid < 0 => environment crc in flash is invalid
- */
- int env_crc_valid;
-};
-#endif /* __ASSEMBLY__ */
-
#define CFG_HZ 1000
-#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
+#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
/* AT91C_TC_TIMER_DIV1_CLOCK */
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
#error CONFIG_USE_IRQ not supported
#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
+ "addmtd;bootm\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
+ "addcons addmtd; bootm\0" \
+ "flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
+ "flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
+ "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
+ "${hostname}::off\0" \
+ "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
+ "addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
+ "64k(environment),768k(linux),4096k(root),-\0" \
+ "load=tftp ${loadaddr} ${loadfile}\0" \
+ "update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
+ "cp.b ${loadaddr} 10000000 ${filesize};" \
+ "protect on 10000000 1001ffff\0" \
+ "updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
+ "cp.b ${loadaddr} 10030000 ${filesize}\0" \
+ "updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
+ "cp.b ${loadaddr} 100f0000 ${filesize}\0" \
+ "updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
+ "cp.b ${loadaddr} 104f0000 ${filesize}\0" \
+ "cramfsimage=cramfs_cmc-pu2.img\0" \
+ "jffsimage=jffs2_cmc-pu2.img\0" \
+ "loadfile=u-boot_cmc-pu2.bin\0" \
+ "bootfile=uImage_cmc-pu2\0" \
+ "loadaddr=0x20800000\0" \
+ "hostname=CMC-TC-PU2\0" \
+ "bootcmd=run dhcp_start;run flash_cramfs\0" \
+ "autoload=n\0" \
+ "dhcp_start=echo no DHCP\0" \
+ "ipaddr=192.168.0.190\0"
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff