Convert CONFIG_SYS_NAND_PAGE_COUNT to Kconfig

[platform/kernel/u-boot.git] / include / configs / cm_t43.h

diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 1314cf9..5563bea 100644 (file)
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -8,7 +8,6 @@
 #ifndef __CONFIG_CM_T43_H
 #define __CONFIG_CM_T43_H
 
-#define CONFIG_CM_T43
 #define CONFIG_MAX_RAM_BANK_SIZE       (2048 << 20)    /* 2GB */
 #define CONFIG_SYS_TIMERBASE           0x48040000      /* Use Timer2 */
 
@@ -25,15 +24,10 @@
 /* NAND support */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
@@ -43,18 +37,9 @@
                                         50, 51, 52, 53, 54, 55, 56, 57, }
 
 /* CPSW Ethernet support */
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_PHY_ATHEROS
 #define CONFIG_SYS_RX_ETH_BUFFER       64
 
-/* USB support */
-#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_AM437X_USB2PHY2_HOST
-
 /* Power */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_TPS65218
 
 /* Enabling L2 Cache */
@@ -65,9 +50,6 @@
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
 
 #define CONFIG_HSMMC2_8BIT
 
@@ -117,10 +99,5 @@
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
 
 /* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
-#define CONFIG_SYS_EEPROM_SIZE                 256
 
 #endif /* __CONFIG_CM_T43_H */