Convert CONFIG_EMIF4 et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / cm_t3517.h

diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index 2417d16..b44777f 100644 (file)
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -23,8 +23,6 @@
  * to be on the safe side once the default is changed.
  */
 
-#define CONFIG_EMIF4   /* The chip has EMIF4 controller */
-
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
 
@@ -84,7 +82,6 @@
 
 #ifndef CONFIG_USB_MUSB_AM35X
 #define CONFIG_USB_OMAP3
-#define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
 #else /* !CONFIG_USB_MUSB_AM35X */
@@ -92,7 +89,6 @@
 #endif /* CONFIG_USB_MUSB_AM35X */
 
 /* commands to include */
-#define CONFIG_CMD_MTDPARTS    /* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT         "nand0=nand"
@@ -100,12 +96,9 @@
                                "1920k(u-boot),256k(u-boot-env),"\
                                "4m(kernel),-(fs)"
 
-#define CONFIG_CMD_NAND                /* NAND support                 */
-
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    400000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
-#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_I2C_EEPROM_BUS      0
@@ -185,12 +178,7 @@
 #define CONFIG_SYS_AUTOLOAD            "no"
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS             32      /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE            (CONFIG_SYS_CBSIZE)
 
 #define CONFIG_SYS_LOAD_ADDR           (OMAP34XX_SDRC_CS0 + 0x02000000)
 
@@ -219,10 +207,8 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
-#define CONFIG_ENV_IS_IN_NAND
-#define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
-#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET              0x260000
+#define CONFIG_ENV_ADDR                        0x260000
 
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_DRIVER_TI_EMAC
@@ -255,17 +241,11 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
 
-#define CONFIG_OMAP3_SPI
-
 /* EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 #define CONFIG_SYS_EEPROM_SIZE                 256
 
-#define CONFIG_CMD_EEPROM_LAYOUT
-#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v1, v2, v3"
-
 #endif /* __CONFIG_H */