Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging

[platform/kernel/u-boot.git] / include / configs / cm_t35.h

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index b28bd8e..568ae8e 100644 (file)
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -37,6 +37,7 @@
  */
 #define CONFIG_OMAP    /* in a TI OMAP core */
 #define CONFIG_OMAP34XX        /* which is a 34XX */
+#define CONFIG_OMAP_GPIO
 #define CONFIG_CM_T3X  /* working with CM-T35 and CM-T3730 */
 
 #define CONFIG_SYS_TEXT_BASE   0x80008000
@@ -56,7 +57,6 @@
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ                          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT               1
@@ -77,7 +77,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
+#define CONFIG_ENV_SIZE                (16 << 10)      /* 16 KiB */
                                        /* Sector */
 #define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + (128 << 10))
 
@@ -174,7 +174,7 @@
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
                                                        /* to access nand at */
                                                        /* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
+#define GPMC_NAND_ECC_LP_x8_LAYOUT
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
@@ -231,7 +231,7 @@
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
@@ -251,7 +251,6 @@
 #define CONFIG_SYS_AUTOLOAD            "no"
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "CM-T3x # "
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 /* Print Buffer Size */
@@ -279,13 +278,6 @@
 #define CONFIG_SYS_HZ                  1000
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS   1       /* CS1 is never populated */
@@ -297,26 +289,15 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
 /* Configure the PISMO */
 #define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
-#endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
+#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #define CONFIG_ENV_IS_IN_NAND
-#define ONENAND_ENV_OFFSET             0x260000 /* environment starts here */
 #define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET