Convert CONFIG_SYS_NAND_BAD_BLOCK_POS to Kconfig

[platform/kernel/u-boot.git] / include / configs / cm_t335.h

diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 0609cca..7cb56cb 100644 (file)
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -1,33 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Config file for Compulab CM-T335 board
  *
  * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
  *
  * Author: Ilya Ledvich <ilya@compulab.co.il>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_CM_T335_H
 #define __CONFIG_CM_T335_H
 
-#define CONFIG_CM_T335
-
 #include <configs/ti_am335x_common.h>
 
-#undef CONFIG_SPI
-
 #undef CONFIG_MAX_RAM_BANK_SIZE
 #define CONFIG_MAX_RAM_BANK_SIZE       (512 << 20)     /* 512MB */
 
-#define CONFIG_MACH_TYPE               MACH_TYPE_CM_T335
-
 /* Clock Defines */
 #define V_OSCK                         25000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
-#define CONFIG_ENV_SIZE                        (16 << 10)      /* 16 KiB */
-
 #ifndef CONFIG_SPL_BUILD
 #define MMCARGS \
        "mmcdev=0\0" \
@@ -82,30 +73,19 @@
 #define CONFIG_SYS_AUTOLOAD            "no"
 
 /* Serial console configuration */
-#define CONFIG_SERIAL1                 1       /* UART0 */
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1                0x44e09000      /* UART0 */
 #define CONFIG_SYS_NS16550_COM2                0x48022000      /* UART1 */
 
 /* I2C Configuration */
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_BUS      0
 
 /* SPL */
 
 /* Network. */
-#define CONFIG_PHY_ATHEROS
 
 /* NAND support */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
@@ -122,7 +102,6 @@
 #undef CONFIG_SYS_NAND_U_BOOT_OFFS
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x200000
 
-#define CONFIG_ENV_OFFSET              0x300000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #ifdef CONFIG_SPL_OS_BOOT
@@ -136,11 +115,6 @@
 /* Status LED polarity is inversed, so init it in the "off" state */
 
 /* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
-#define CONFIG_SYS_EEPROM_SIZE                 256
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -153,4 +127,3 @@
 #endif /* CONFIG_SPL_BUILD */
 
 #endif /* __CONFIG_CM_T335_H */
-