/*
- * U-boot - Configuration file for CM-BF561 board
+ * U-Boot - Configuration file for CM-BF561 board
*/
#ifndef __CONFIG_CM_BF561_H__
#include <asm/config-pre.h>
-
/*
* Processor Settings
*/
#define CONFIG_BFIN_CPU bf561-0.3
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
-
/*
* Clock Settings
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
#define CONFIG_PLL_BYPASS 0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
/* Values can range from 0-63 (where 0 means 64) */
-#define CONFIG_VCO_MULT 22
+#define CONFIG_VCO_MULT 20
/* CCLK_DIV controls the core clock divider */
/* Values can be 1, 2, 4, or 8 ONLY */
#define CONFIG_CCLK_DIV 1
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 5
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
/*
* Memory Settings
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
-
/*
* Network Settings
*/
#define ADI_CMDS_NETWORK 1
-/* The next 2 lines are for use with DEV-BF5xx */
-#define CONFIG_DRIVER_SMC91111 1
-#define CONFIG_SMC91111_BASE 0x28000300
-/* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */
-/* #define CONFIG_DRIVER_SMC911X 1 */
-/* #define CONFIG_DRIVER_SMC911X_BASE 0x24080000 // AMS1 */
-/* #define CONFIG_DRIVER_SMC911X_32_BIT 1 */
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_BASE 0x24008000 /* AMS1 */
+#define CONFIG_SMC911X_16_BIT
#define CONFIG_HOSTNAME cm-bf561
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */
-
/*
* Flash Settings
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 67
-
/*
* Env Storage Settings
*/
#define CONFIG_ENV_OFFSET 0x20000
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE 0x10000
-
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
/*
* Misc Settings
*/
#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
-
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
/*
* Pull in common ADI header for remaining command/environment setup