Merge git://git.denx.de/u-boot-mpc85xx

[platform/kernel/u-boot.git] / include / configs / cl-som-am57x.h

diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h
index 48c0f7f..e1f724b 100644 (file)
--- a/include/configs/cl-som-am57x.h
+++ b/include/configs/cl-som-am57x.h
@@ -28,17 +28,6 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_REVISION_TAG
 
-/* Status LED */
-#define CONFIG_STATUS_LED              /* Status LED enabled */
-#define CONFIG_GPIO_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define GREEN_LED_DEV                  0
-                                       /* cl_som_am57x Green LED is GPIO2_5 */
-#define GREEN_LED_GPIO                 37
-#define STATUS_LED_BIT                 GREEN_LED_GPIO
-#define STATUS_LED_STATE               STATUS_LED_ON
-#define STATUS_LED_PERIOD              (CONFIG_SYS_HZ / 2)
-
 /* PMIC I2C bus number */
 #define CONFIG_SYS_SPD_BUS_NUM 3
 
@@ -96,10 +85,6 @@
 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
 
-/* GPT */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
@@ -116,4 +101,82 @@
 
 #endif /* !CONFIG_SPL_BUILD */
 
+/* CPSW Ethernet */
+#define CONFIG_DRIVER_TI_CPSW
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHY_ATHEROS
+#define CONFIG_PHYLIB
+#define CONFIG_SYS_RX_ETH_BUFFER       64
+#define PHY_ANEG_TIMEOUT               8000
+
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT         10
+
+/* Default environment */
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       DEFAULT_LINUX_BOOT_ENV \
+       "autoload=no\0" \
+       "baudrate=115200\0" \
+       "console=ttyO2,115200n8\0" \
+       "bootdelay=3\0" \
+       "fdtfile=am57xx-sbc-am57x.dtb\0" \
+       "kernel=zImage-cl-som-am57x\0" \
+       "bootscr=bootscr.img\0" \
+       "displaytype=hdmi\0" \
+       "bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \
+       "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
+       "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
+       "load_mmc=mmc dev ${mmcdev} && mmc rescan && " \
+               "run mmcloadkernel run mmcloadfdt\0" \
+       "mmcroot=/dev/mmcblk1p2\0" \
+       "mmcrootfstype=ext4 rw rootwait\0" \
+       "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
+               "rootfstype=${mmcrootfstype}\0" \
+       "mmcbootscript=setenv mmcdev 0; mmc dev ${mmcdev} && mmc rescan && " \
+               "load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
+               "echo Running bootscript from MMC/SD Card ... && " \
+               "source ${loadaddr}\0" \
+       "mmcboot=setenv mmcdev 0 && run load_mmc && " \
+               "run mmcargs && echo Booting from MMC/SD Card ... && " \
+               "run bootkernel\0" \
+       "emmcroot=/dev/mmcblk0p2\0" \
+       "emmcrootfstype=ext4 rw rootwait\0" \
+       "emmcargs=setenv bootargs console=${console} " \
+               "root=${emmcroot} " \
+               "rootfstype=${emmcrootfstype}\0" \
+       "emmcbootscript=setenv mmcdev 1; mmc dev ${mmcdev} && mmc rescan && " \
+               "load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
+               "echo Running bootscript from eMMC ... && " \
+               "source ${loadaddr}\0" \
+       "emmcboot=setenv mmcdev 1 && run load_mmc && " \
+               "run emmcargs && echo Booting from eMMC ... && " \
+               "run bootkernel\0" \
+       "sataroot=/dev/sda2\0" \
+       "satarootfstype=ext4 rw rootwait\0" \
+       "load_sata=load scsi 0 ${loadaddr} ${kernel} && " \
+               "load scsi 0 ${fdtaddr} ${fdtfile}\0" \
+       "sataargs=setenv bootargs console=${console} " \
+               "root=${sataroot} " \
+               "rootfstype=${satarootfstype}\0" \
+       "satabootscript=load scsi 0 ${loadaddr} ${bootscr} && " \
+               "echo Running bootscript from SATA ... && " \
+               "source ${loadaddr}\0" \
+       "sataboot=run load_sata && run sataargs && " \
+               "echo Booting from SATA ... && " \
+               "run bootkernel\0" \
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND \
+       "run mmcbootscript || run mmcboot || " \
+       "run satabootscript || run sataboot || " \
+       "run emmcbootscript || run emmcboot"
+
+
 #endif /* __CONFIG_CL_SOM_AM57X_H */