Convert CONFIG_ENV_SPI_* to Kconfig

[platform/kernel/u-boot.git] / include / configs / cl-som-am57x.h

diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h
index 3000453..bf2bb44 100644 (file)
--- a/include/configs/cl-som-am57x.h
+++ b/include/configs/cl-som-am57x.h
@@ -1,75 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for CompuLab CL-SOM-AM57x board
  *
  * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
  *
  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_CL_SOM_AM57X_H
 #define __CONFIG_CL_SOM_AM57X_H
 
-#define CONFIG_NR_DRAM_BANKS           2
-
 #define CONSOLEDEV                     "ttyO2"
 #define CONFIG_SYS_NS16550_COM3                UART3_BASE      /* UART3 */
-#define CONFIG_CONS_INDEX              3
 
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
+#define PARTS_DEFAULT
+
 #include <configs/ti_omap5_common.h>
 
 /* misc */
-#define CONFIG_MISC_INIT_R
 #define CONFIG_REVISION_TAG
 
 /* PMIC I2C bus number */
 #define CONFIG_SYS_SPD_BUS_NUM 3
 
 /* SPI Flash support */
-#undef  CONFIG_OMAP3_SPI
-
 #define CONFIG_TI_SPI_MMAP
-#define CONFIG_SF_DEFAULT_SPEED                48000000
-#define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
 
 /* SPI SPL defines */
 /* Offsets: 0K - SPL1, 64K - SPL2, 128K - SPL3, 192K - SPL4, 256K - U-Boot */
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (256 * 1024)
 #define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_LOAD
 
-/* SD/MMC RAW boot */
-#undef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
-#undef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
+/* SD/MMC RAW/FS boot */
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
 
 /* Environment */
 #define CONFIG_ENV_SIZE                        (16 << 10) /* 16 KiB env size */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 #define CONFIG_ENV_OFFSET              (768 * 1024)
-#define CONFIG_ENV_SPI_MAX_HZ          48000000
 
 /* EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 #define CONFIG_SYS_I2C_EEPROM_BUS       3
 
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EEPROM_LAYOUT
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_EEPROM_SIZE         256
 
 #ifndef CONFIG_SPL_BUILD
 /* SATA */
-#define CONFIG_CMD_SCSI
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
 #define CONFIG_SYS_SCSI_MAX_LUN                1
@@ -77,8 +60,6 @@
                                                CONFIG_SYS_SCSI_MAX_LUN)
 /* PCA9555 GPIO expander support */
 #define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
 
@@ -86,33 +67,19 @@
 
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 
-#define CONFIG_OMAP_USB_PHY
 #define CONFIG_OMAP_USB3PHY1_HOST
 
 /* USB Networking options */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
 
 /* CPSW Ethernet */
-#define CONFIG_DRIVER_TI_CPSW
-#define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_PHY_GIGE
 #define CONFIG_PHY_ATHEROS
-#define CONFIG_PHYLIB
 #define CONFIG_SYS_RX_ETH_BUFFER       64
 #define PHY_ANEG_TIMEOUT               8000
 
-#define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
 
 /* Default environment */
@@ -130,8 +97,10 @@
        "bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \
        "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
        "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
+       "emmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
+       "emmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
        "load_mmc=mmc dev ${mmcdev} && mmc rescan && " \
-               "run mmcloadkernel run mmcloadfdt\0" \
+               "run mmcloadkernel && run mmcloadfdt\0" \
        "mmcroot=/dev/mmcblk1p2\0" \
        "mmcrootfstype=ext4 rw rootwait\0" \
        "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
@@ -167,7 +136,7 @@
                "source ${loadaddr}\0" \
        "sataboot=run load_sata && run sataargs && " \
                "echo Booting from SATA ... && " \
-               "run bootkernel\0" \
+               "run bootkernel\0"
 
 #undef CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND \