configs: Remove a number of unreferenced CONFIG options.

[platform/kernel/u-boot.git] / include / configs / chiliboard.h

diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index db990fc..fdbcbf5 100644 (file)
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -8,34 +8,23 @@
 
 #include <configs/ti_am335x_common.h>
 
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_TIMESTAMP
-#endif
-
 /* Clock Defines */
 #define V_OSCK                         24000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
 #define NANDARGS \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "nandargs=setenv bootargs console=${console} ${optargs} " \
                "${mtdparts} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
        "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \
-       "nandrootfstype=ubifs rootwait=1\0" \
+       "nandrootfstype=ubifs rootwait\0" \
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
                "nand read ${fdt_addr} NAND.u-boot-spl-os; " \
                "nand read ${loadaddr} NAND.kernel; " \
                "bootz ${loadaddr} - ${fdt_addr}\0"
 
-#define CONFIG_BOOTCOMMAND \
-       "run mmcboot; " \
-       "run nandboot; " \
-       "run netboot"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
        "fdt_addr=0x87800000\0" \
@@ -115,22 +104,10 @@
 #define CONFIG_SYS_NS16550_COM5                0x481a8000      /* UART4 */
 #define CONFIG_SYS_NS16550_COM6                0x481aa000      /* UART5 */
 
-/* PMIC support */
-#define CONFIG_POWER_TPS65217
-
 /* SPL */
-/* Bootcount using the RTC block */
-#define CONFIG_SYS_BOOTCOUNT_BE
 
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
 /* NAND: driver related configs */
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
@@ -141,39 +118,5 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x000c0000
-/* NAND: SPL related configs */
-
-/* USB configuration */
-#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_OFFSET              0x001c0000
-#define CONFIG_ENV_OFFSET_REDUND       0x001e0000
-#define CONFIG_ENV_SIZE                        SZ_128K
-#define CONFIG_SYS_ENV_SECT_SIZE       CONFIG_SYS_NAND_BLOCK_SIZE
-#else
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#define CONFIG_ENV_OFFSET              SZ_128K
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#endif
-
-/* Network. */
-#define CONFIG_PHY_SMSC
 
 #endif /* ! __CONFIG_CHILIBOARD_H */